Optimization of the Characteristic Straight Line Method by a “Best Estimate“ of Observed, Normal Orthometric Elevation Differences

In this paper, to optimize the “Characteristic Straight Line Method” which is used in the soil displacement analysis, a “best estimate” of the geodetic leveling observations has been achieved by taking in account the concept of ‘Height systems”. This concept has been discussed in detail and consequently the concept of “height”. In landslides dynamic analysis, the soil is considered as a mosaic of rigid blocks. The soil displacement has been monitored and analyzed by using the “Characteristic Straight Line Method”. Its characteristic components have been defined constructed from a “best estimate” of the topometric observations. In the measurement of elevation differences, we have used the most modern leveling equipment available. Observational procedures have also been designed to provide the most effective method to acquire data. In addition systematic errors which cannot be sufficiently controlled by instrumentation or observational techniques are minimized by applying appropriate corrections to the observed data: the level collimation correction minimizes the error caused by nonhorizontality of the leveling instrument's line of sight for unequal sight lengths, the refraction correction is modeled to minimize the refraction error caused by temperature (density) variation of air strata, the rod temperature correction accounts for variation in the length of the leveling rod' s Invar/LO-VAR® strip which results from temperature changes, the rod scale correction ensures a uniform scale which conforms to the international length standard and the introduction of the concept of the ‘Height systems” where all types of height (orthometric, dynamic, normal, gravity correction, and equipotential surface) have been investigated. The “Characteristic Straight Line Method” is slightly more convenient than the “Characteristic Circle Method”. It permits to evaluate a displacement of very small magnitude even when the displacement is of an infinitesimal quantity. The inclination of the landslide is given by the inverse of the distance reference point O to the “Characteristic Straight Line”. Its direction is given by the bearing of the normal directed from point O to the Characteristic Straight Line (Fig..6). A “best estimate” of the topometric observations was used to measure the elevation of points carefully selected, before and after the deformation. Gross errors have been eliminated by statistical analyses and by comparing the heights within local neighborhoods. The results of a test using an area where very interesting land surface deformation occurs are reported. Monitoring with different options and qualitative comparison of results based on a sufficient number of check points are presented. Mahmoud M. S. Albattah, Full professor, is with the Civil Engineering Department, College of Engineering, University of Jordan, 11942 AmmanJordan, ([email protected]), http//fetweb.ju.edu.jo/staff/ce/malbattah/ Keywords—Characteristic Straight Line method, Dynamic height, Landslides, Orthometric height, Systematic errors