Evaluation of Anti-Surge Control Concepts during ESD Simulation of dynamic process behaviour with PULSIM
نویسنده
چکیده
This paper describes the potential of dynamic process simulation for operators and engineering contractors as a tool to analyse and solve operational and (front-end) engineering issues. The possibilities are illustrated by a typical project involving system dynamics. The objective of this project was to evaluate the effectiveness of several alternatives to prevent surge and overheating in a compressor system during emergency shutdown (ESD). 1. Simulation of Process Dynamics 1.
منابع مشابه
Development of a compression system dynamic simulation code for testing and designing of anti-surge control system
In recent years, several research activities have been conducted to develop knowledge in analysis, design and optimization of compressor anti-surge control system. Since the anti-surge control testing on a full-scale compressor is limited to possible consequences of failure, and also the experimental facility can be expensive to set up control strategies and logic, design process often involves...
متن کاملEffect of Platform Surge Motion on the Performance of 5MW NREL Offshore Floating Wind Turbine
In this study, an unsteady aerodynamic simulation is performed to realize the influences of platform surge motion on the aerodynamic performance of a high capacity offshore floating wind turbine. A dynamic model with pitch angle control system is utilized to propose a more realistic model of wind turbine and also achieve the rated condition of the rotor. The transient effect of platform surge m...
متن کاملارائه مدلی جهت بررسی رفتار انبساط استوانه جدار ضخیم تحت بارگذاری انفجاری داخلی
Evaluation of behaviour of thick-walled cylinders under high strain rate loading is of great importance because of their many applications. Most of the studies around these structures were performed in the state of static and quasi-static. Therefore, development of analytical model in structures loaded with high rates in dynamic state and in complete plastic domain is valuable. The main purpos...
متن کاملModel Predictive Anti-Surge Control of Centrifugal Compressors with Variable-Speed Drives
In this article torque assisted anti-surge control (TASC), a compressor anti-surge control system based on model predictive control (MPC) is presented. TASC is implemented on an embedded system for the control of compressor stations with electrical variable-speed drives (VSD) which are used in applications such as natural gas transportation via pipelines. The manipulated variables of the propos...
متن کاملInvestigation and Control of Unstable Chaotic Behavior Using of Chaos Theory in Two Electrical Power Systems: 1-Buck Converter2- Power Transformer
This paper consist of two sections: control and stabilizing approach for chaotic behaviour of converter is introduced in first section of this paper for the removal of harmonic caused by the chaotic behaviour in current converter. For this work, a Time- Delayed Feedback Controller (TDFC) control method for stability chaotic behaviour of buck converter for switching courses in current control mo...
متن کامل