A Tool for Single-Fault Diagnosis in Linear Analog Circuits with Tolerance Using the T-Vector Approach
نویسندگان
چکیده
In previous works a technique for doing single fault diagnosis in linear analog circuits was developed. Under certain conditions, one of them being exact circuit parameters, it was shown that only two measurements taken on two selected circuit nodes, at a single frequency, were needed to detect and diagnose any parametric fault. In this paper, the practical value of the technique is evaluated by extending it to the diagnosis of faults in circuits with parameters subject to tolerance. With this in mind, single parametric faults of different strenghts are randomly injected in the circuit under study and, afterwards, these are diagnosed (or the diagnosis fails...). Results are reported on an active filter. Conclusions are drawn on the robustness and effectiveness of the technique.
منابع مشابه
Test Vector Based Multiple Soft Faults Detection in Linear Analog Circuits with Hardware Implementation
A method to detect multiple soft faults in linear analog circuits using test vectors is proposed in this paper. The circuit under test (CUT) is simulated used Modified Nodal Analysis (MNA) and with the knowledge of circuit topology and the component values, the test vectors associated with each components of the CUT and diagnosis variables are derived. In real time fault detection, the dependen...
متن کاملA Methodology for Model-based Diagnosis of Analog Circuits
In this paper we present a methodology for model-based diagnosis of analog circuits using the constraint logic programming approach. Presented methodology stems from our earlier work on the diagnosis of active analog lters by the artiicial intelligence tool CLP(<) and has the following major improvements: modeling of the diagnosed circuit is generalized to arbitrary analog circuits consisting o...
متن کاملA Methodology for Model-based Diagnosis of Analogue Circuits
In this paper we present a methodology for model-based diagnosis of analog circuits using the constraint logic programming approach. Presented methodology stems from our earlier work on the diagnosis of active analog lters by the artiicial intelligence tool CLP(<) and has the following major improvements: modeling of the diagnosed circuit is generalized to arbitrary analog circuits consisting o...
متن کاملSingle Hard Fault Detection in Linear Analog Circuits Based On Simulation before Testing Approach
A method for single hard fault detection in linear analog circuits based on simulation before testing approach is proposed in this paper. Simulation before testing approach locates or identifies faulty components of the circuit under test (CUT) by creating a fault dictionary for all the potentially faulty components from the simulation of CUT. In the proposed approach, the CUT is simulated usin...
متن کاملTest Point Selection and Multiple Soft Faults Detection in Linear Analog Circuits Based on Multiple Frequency Measurements
KEYWORDS analog circuit – fault diagnosis – test vector –tolerance –test node – multifrequency-modified nodal analysis ABSTRACT A method to identify and select test points for analog circuit testing and to detect multiple soft faults in linear analog circuits using multiple frequency measurements is proposed in this paper. Modified nodal analysis (MNA) method is used to simulate the circuit und...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- VLSI Design
دوره 2008 شماره
صفحات -
تاریخ انتشار 2008