Contact Tank Design Impact on Process Performance

نویسندگان

  • Athanasios Angeloudis
  • Thorsten Stoesser
  • Carlo Gualtieri
  • Roger A. Falconer
چکیده

In this study three-dimensional numerical models were refined to predict reactive processes in disinfection contact tanks (CTs). The methodology departs from the traditional performance assessment of contact tanks via hydraulic efficiency indicators, as it simulates directly transport and decay of the disinfectant, inactivation of pathogens and accumulation of by-products. The method is applied to study the effects of inlet and compartment design on contact tank performance, with special emphasis on turbulent mixing and minimisation of internal recirculation and short-circuiting. In contrast to the conventional approach of maximising the length-to-width ratio, the proposed design changes are aimed at addressing and mitigating adverse hydrodynamic structures, which have historically led to poor hydraulic efficiency in many existing contact tanks. The results suggest that water treatment facilities can benefit from in-depth analyses of the flow and kinetic processes through computational fluid dynamics, resulting in up to 38 %more efficient pathogen inactivation and 14 % less disinfection by-product formation.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Life Cycle Design of a Fuel Tank System

This life cycle design (LCD) project was a collaborative effort between the National Pollution Prevention Center at the University of Michigan, General Motors (GM), and the U.S. Environmental Protection Agency (EPA). The primary objective of this project was to apply life cycle design tools to guide the improvement of fuel tank systems. Two alternative fuel tank systems used in a 1996 GM vehicl...

متن کامل

System Identification of a Heaving Point Absorber: Design of Experiment and Device Modeling

Abstract: Empirically based modeling is an essential aspect of design for a wave energy converter. Empirically based models are used in structural, mechanical and control design processes, as well as for performance prediction. Both the design of experiments and methods used in system identification have a strong impact on the quality of the resulting model. This study considers the system iden...

متن کامل

Design and construction of 6-component balance dynamometer for measurement of the forces, moments andmotions of ship models in the towing tank

During design spiral of a merchant ship or a naval vessel, it is important to perform towing tank tests in order to measure its performance either in calm water maneuvers or in waves for seakeeping performance. Also, to optimize a hydrodynamic design, towing tank tests are advantageous.This article presents the results of an applied research project. The objective of this project is to design a...

متن کامل

Modeling, Simulation and Control of Temperature and Level in a Multivariable Water Tank Process*

The project is concerned with the design of a water tank process and experimental evaluation of feedback control structures to achieve water level and temperature control at desired set point values. The manipulated variables are the pump power, on the water outflow line, and heat supply to the tank. Detailed, first principles-based, dynamic models as well as empirical models for this interacti...

متن کامل

Design and Modeling of State Feedback with Integral Controller for a Non-linear Spherical tank Process

This paper presents the design and modeling of State Feedback with integral controller to implement in a Non-linear Spherical Tank SISO process. By using state feedback, it controls the liquid level in the tank as desired .The aim of this paper is to compare the control performance between State feedback with integral controller with conventional ZN, Luyben Tyreus PI/PID, Controllers. The mathe...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016