Placement of Substrate Contacts to Minimize Substrate Noise in Mixed-Signal Integrated Circuits
نویسندگان
چکیده
The placement of substrate contacts in epi and non-epi technologies is analyzed in order to control and reduce the substrate noise amplitude and spreading. The choice of small or large substrate contacts or rings for each of the two major technologies is highlighted. Design guidelines for placing substrate contacts so as to improve the noise immunity of digital circuits in mixed-signal smart-power systems are also presented.
منابع مشابه
Modeling of Substrate Noise Impact on a Single-Ended Cascode LNA in a Lightly Doped Substrate (RESEARCH NOTE)
Substrate noise generated by digital circuits on mixed-signal ICs can disturb the sensitiveanalog/RF circuits, such as Low Noise Amplifier (LNA), sharing the same substrate. This paperinvestigates the adverse impact of the substrate noise on a high frequency cascode LNA laid out on alightly doped substrate. By studying the major noise coupling mechanisms, a new and efficientmodeling method is p...
متن کاملModeling and Simulation of Substrate Noise in Mixed-Signal Circuits Applied to a Special VCO
The mixed-signal circuits with both analog and digital blocks on a single chip have wide applications in communication and RF circuits. Integrating these two blocks can cause serious problems especially in applications requiring fast digital circuits and high performance analog blocks. Fast switching in digital blocks generates a noise which can be introduced to analog circuits by the common su...
متن کاملEfficient and Accurate Modeling and Simulation Techniques for Substrate Coupling Analysis in Deep Submicron Mixed-Signal IC’s
Phase-locked loops (PLLs) are used in wireless receivers to implement a variety of functions, such as frequency synthesis, clock recovery, demodulation, and mixed-signal integrated circuits. Substrate coupling noise is a key problem in today’s large mixed-signal systems. Switching-noise generated by digital circuits can be coupled to sensitive analog circuits through the substrate, can degrade ...
متن کاملSubstrate-Aware Mixed-Signal Macrocell Placement in WRIGHT
AbsfractWe describe a set of placement algorithms for handling substrate-coupled switching noise. A typical mixedsignal IC has both sensitive analog and noisy digital circuits, and the common substrate parasitically couples digital switching transients into the sensitive analog regions of the chip. To preserve the integrity of sensitive analog signals, it is thus necessary to electrically isola...
متن کاملSubstrate optimization based on semi-analytical techniques
Several methods are presented for highly efficient calculation of substrate noise transport in integrated circuits. A three-dimensional Green’s function-based boundary element method, accelerated through use of the fast Fourier transform, allows the computation of sensitivities with respect to all substrate parameters at a considerably higher speed than any methods reported in the literature. S...
متن کامل