Performance Analysis of High Speed Optical Communication using FBG
نویسندگان
چکیده
This paper based on study of communication system over fiber optics. To design high speed system with high performance it is necessary to compensate the dispersion with the help of Fiber Bragg Grating. The performance of communication system simulation is done on Optisystem simulator Vr.12 at different parameters of the system. A high speed NRZ signal is transmitted over SSMF. By simulating the design of optical communication system at different values which includes Q-Factor, Min BER, MZM-Extinction Ratio, FBG length is evaluated. With the help of eye diagram get better result.
منابع مشابه
Design of Arrayed Waveguide Grating based Optical Switch for High Speed Optical Networks
This paper demonstrates the design of an Arrayed Waveguide Gratings (AWG) based optical switch. In the design both physical and network layer analysis is performed. The physical layer power and noise analysis is done to obtain Bit Error Rate (BER). This has been found that at the higher bit rates, BER is not affected with number of buffer modules. Network layer analysis is done to obtain perfor...
متن کاملOptical Pulse Distortion
Pulse distortion and shaping mechanisms play a significant role in optical fiber communication and sensing. In this thesis we shall investigate techniques which alleviate pulse deterioration due to polarization effects, and utilize large chromatic dispersion for system performance enhancement. We first demonstrate a method of mitigating polarization mode dispersion (PMD) in fiber optic communic...
متن کاملLamb wave-based damage detection of composite shells using high-speed fiber-optic sensing
A Lamb wave-based damage identification method called damage imaging method for composite shells is presented. A damage index (DI) is generated from the delay matrix of the Lamb wave response signals, and it is used to indicate the location and approximate area of the damage. A piezoelectric actuator is employed to generate the Lamb waves that are subsequently captured by a fiber Bragg grating ...
متن کاملHigh-speed fibre Bragg grating sensor interrogation using dispersion- compensation fibre
Introduction: Fibre Bragg gratings (FBGs) have proved themselves as the ideal candidates for measuring strain and temperature in smart structures, civil engineering or other harsh environments. The advantages of the FBG sensor over conventional electrical sensors include small size, light weight, immunity to electromagnetic interference, low cost and other inherent advantages of fibre-optic sen...
متن کاملAnalysis of Optical Communication System for Compensation of Dispersion by Comparing using Fiber Bragg Grating
To achieve the foremost effective performance of communication system dispersion should be stipendiary. For data transmission (light signal) in optical communication, optical fibers unit used. Throughout this paper the optical system is incontestable that's supposed in optisystem code to compensate dispersion and to transmit the signal to long length whereas not victimization Fiber general grat...
متن کامل