High Performance Reactive Control for Unbalanced Three Phase Load
نویسندگان
چکیده
In this paper we consider the problem of balancing a three-phase load and how to optimize the TCR operation. For an unbalanced load change a VAT technique is developed by the authors to determine the three compensating susceptance values and then the unsymmetrical firing angles of TCR, which are necessary for a balanced load operation. An objective function (THD) is determined to measure the discontinuity of the TCR operation. For an unbalanced load change, the availability of TSC and the control of TCR produce different values of reactive volt-amperes, in which all produce the balanced operation but with different amounts of harmonics. The paper introduces and develops an iterative algorithm to obtain the optimum firing angle values of TCR, and this is based on minimum generation of harmonics. The results show that a modulated THD is achieved, and this approach guarantees the high performance reactive control for unbalanced three phase load.
منابع مشابه
Improving the performance of UPQC under unbalanced and distortional load conditions: A new control method
This paper presents a new control method for a three-phase four-wire Unified Power Quality Conditioner (UPQC) to deal with the problems of power quality under distortional and unbalanced load conditions. The proposed control approach is the combination of instantaneous power theory and Synchronous Reference Frame (SRF) theory which is optimized by using a self-tuning filter (STF) and without us...
متن کاملA New Control Strategy for Voltage Restoration and Voltage Unbalance Compensation in an Islanded Droop-Controlled Microgrid
Low voltage microgrids including sensitive loads often face unbalanced load conditions. Therefore, a compensation procedure should be carried out in order to balance and restore sensitive load’s voltage. In this paper, an effective voltage control strategy has been proposed for the autonomous operation of microgrids, under unbalanced load conditions. The proposed strategy balances single-phase...
متن کاملA shunt active power filter control for unbalanced conditions
This paper first presents a simple control technique for active filters to compensate current harmonics and reactive power of nonlinear loads. This method is usable for both single –phase and three –phase systems. Then a new method for load balancing and reactive power compensation for unbalanced sinusoidal load currents is presented. Finally by combination of two methods an active filter contr...
متن کاملAnalysis And Simulation Of Shunt Active Power Filter Under Unbalanced And Distorted Load Conditions
Abstract— The active power filters eliminates the harmonic distortion caused by non-linear loads and improves the filtering efficiency performance when compared with the passive filters. This paper inspects about the analysis and simulation of a three phase four wire shunt active power f ilter under unbalanced and distorted load conditions. Current harmonic compensation is achieved by the imple...
متن کاملHysteresis Control for Shunt Active Power Filter under Unbalanced Three-Phase Load Conditions
This paper focuses on a four-wire shunt active power filter (APF) control scheme proposed to improve the performance of the APF. This filter is used to compensate harmonic distortion in three-phase four-wire systems. Several harmonic suppression techniques have been widely proposed and applied to minimize harmonic effects. The proposed control scheme can compensate harmonics and reactive power ...
متن کامل