In situ hydrogen loading on zirconium powder
نویسندگان
چکیده
For the first time, various hydride phases in a zirconium-hydrogen system have been prepared in a high-energy synchrotron X-ray radiation beamline and their transformation behaviour has been studied in situ. First, the formation and dissolution of hydrides in commercially pure zirconium powder were monitored in real time during hydrogenation and dehydrogenation, then whole pattern crystal structure analysis such as Rietveld and Pawley refinements were performed. All commonly reported low-pressure phases presented in the Zr-H phase diagram are obtained from a single experimental arrangement.
منابع مشابه
Comparison of doped combination zirconium-tungsten, zirconium- molybdenum and molybdenum-tungsten on single-wall vanadium oxide nanotube in hydrogen gas adsorption
In this study, doped vanadium oxide nanotubes were evaluated using different software to study the absorption of hydrogen gas. Vanadium oxide nanotubes are one of the options for absorption and storage hydrogen gas. In this research study for the first time, the Monte Carlo simulation was used to investigate the hydrogen gas absorption behavior in molybdenum-tungsten, molybdenum-zirconium and z...
متن کاملIN-SITU OBSERVATION OF ErD2 FORMATION DURING D2 LOADING VIA NEUTRON DIFFRACTION
In an effort to better understand the structural changes occurring during hydrogen loading of erbium target materials, we have performed in-situ D2 loading of erbium metal (powder) at temperature (450C) with simultaneous neutron diffraction analysis. This experiment tracked the conversion of Er metal to the erbium deuteride (solid-solution) phase and then on to the (fluorite) phase. Complet...
متن کاملSynthesis of WC-8Co cermet powder in WO3-Co3O4-C system by in situ carbothermic solid reduction method under hydrogen atmosphere: (phase, microstructural and thermodynamic analysis)
WC-Co cermets are among the advanced engineering materials that are considered for their special properties such as abrasion resistance and high hardness. The aim of this study was to determine the optimal amount of carbon in raw materials and industrial production of WC-8Co cermet powder from metal oxides WO3, Co3O4 and activated carbon by solid carbothermic reduction method in situ and under ...
متن کاملZirconium Carbide Produced by Spark Plasma Sintering and Hot Pressing: Densification Kinetics, Grain Growth, and Thermal Properties
Spark plasma sintering (SPS) has been employed to consolidate a micron-sized zirconium carbide (ZrC) powder. ZrC pellets with a variety of relative densities are obtained under different processing parameters. The densification kinetics of ZrC powders subjected to conventional hot pressing and SPS are comparatively studied by applying similar heating and loading profiles. Due to the lack of ele...
متن کاملReduction characteristics of copper oxide in cerium and zirconium oxide systems
The reduction of CuO dispersed on ̄uorite-type oxide catalysts, namely La-doped CeO2 and Y-doped ZrO2 was studied in this work. On both supports distinct copper species were identi®ed as a function of copper content by temperatureprogrammed reduction (TPR) by H2 and CH4, X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD) and scanning transmission electron microscopy/energy d...
متن کامل