Turbine Design to Mitigate Forcing (postprint)
نویسنده
چکیده
منابع مشابه
Numerical optimization of hydrofoil geometry for a Darrieus hydraulic turbine using dynamic mesh and central composite design
In this study, a Darrieus hydraulic turbine for power generation applications is chosen and the response surface methodology (RSM) based on central composite design (CCD) is applied to obtain the optimized design for its hydrofoil geometry to increase the torque coefficient. For this aim, all turbine performance factors, except hydrofoil geometry, were considered to be constant and the turbine ...
متن کاملAltering Kinetic Energy Entrainment in Large Eddy Simulations of Large Wind Farms Using Unconventional Wind Turbine Actuator Forcing
In this study, horizontally periodic large eddy simulations (LES) are utilized to study turbulent atmospheric boundary-layer flow over wind turbines in the far-downstream portion of a large wind farm where the wakes have merged and the flow is fully developed. In an attempt to increase power generation by enhancing the mean kinetic energy (MKE) entrainment to the wind turbines, hypothetical syn...
متن کاملOperating Strategies and Design Recommendations for Mitigating Local Damage Effects in Offshore Turbine Blades
Two major barriers to widespread US acceptance of offshore wind energy is reliability of rotor blades and the difficulty to access for inspection and maintenance. This work presents operation and design strategies aimed to increase blade reliability and maximize power production. Operating strategies that prolong blade life while optimizing energy output allow for smarter maintenance planning a...
متن کاملDesign and Implementation of the Rotor Blades of Small Horizontal Axis Wind Turbine
Since the renewable resources of energy have become extremely important, especially wind energy, scientists have begun to modify the design of the wind turbine components, mainly rotor blades. Aerodynamic design considered a major research field related to power production of a small horizontal wind turbine, especially in low wind speed locations. This study displays an approach to the selectio...
متن کاملPerformance improvement of a wind turbine blade using a developed inverse design method
The purpose of this study is to improve the aerodynamic performance of wind turbine blades, using the Ball-Spine inverse design method. The inverse design goal is to calculate a geometry corresponds to a given pressure distribution on its boundaries. By calculating the difference between the current and target pressure distributions, geometric boundaries are modified so that the pressure di...
متن کامل