Morphology, structure, optical, and electrical properties of AgSbO3
نویسندگان
چکیده
The morphology of defect pyrochlore-type, AgSbO3 microparticle/nanoparticles obtained via solid state reaction evolve from irregular to Fullerene-like polyhedra before finally decomposing into metal-organic framework-5 like particles with increase in sintering temperature. The defect pyrochlore-type AgSbO3 particles are slightly Ag deficient while the valence of the antimony ion is shown to be +5 giving rise to a probable stoichiometry of Ag1−xSb O3−x/2, with x 0.01–0.04. A highly structured diffuse intensity distribution observed via electron diffraction is interpreted in terms of correlated displacements of one-dimensional 1D silver ion chains along 110 directions. A redshifting in the absorption edges in UV-visible absorption spectra is observed for samples prepared at sintering temperatures higher than 1000 °C and attributed to the surface plasma resonance effect associated with small amounts of excess metallic Ag on the Ag1−xSb O3−x/2 particles. An electrical properties investigation of the silver antimonate samples via dielectric, conductivity, and electric modulus spectroscopy shows a prominent dielectric relaxation associated with grain boundaries. The silver ion conductivity is associated with correlated displacements of 1D silver ion chains along 110 directions. © 2010 American Institute of Physics. doi:10.1063/1.3462434
منابع مشابه
Structural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملEnhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates
Structural, electrical and optical properties of indium tin oxide or ITO (In2O3:SnO2) thin films on different substrates are investigated. A 100-nm-thick pre-deposited zinc oxide (ZnO) buffer layer is utilized to simultaneously improve the electrical and optical properties of ITO films. High purity ZnO and ITO layers are deposited with a radio frequency sputtering in argon ambient with plasma p...
متن کاملStudy of structural, optical and electrical properties of ZnO/CuO nanocomposites
In this work, the first ZnO/CuO nanocomposites were synthesized by chemical vapour deposition (CVD), thermal evaporation (PVD) and sputtering on silicon substrates (Si). Then, the structural, optical and electrical properties of the samples were investigated. Examination of the X-ray diffraction patterns confirmed the mixed-phase formation of hexagonal zinc oxide (ZnO) and monoclinic copper oxi...
متن کاملComparison of the defective pyrochlore and ilmenite polymorphs of AgSbO3 using GGA and hybrid DFT
Silver antimonate, AgSbO3, in both its defective pyrochlore and ilmenite structural polymorphs, has been suggested as a possible candidate mixed metal oxide for use in the photocatalytic splitting of water in visible light. In this study, we report electronic-structure calculations, using both standard and hybrid density-functional-theory approaches, on both structural forms of AgSbO3 to fully ...
متن کامل