Surface forces and measuring techniques
نویسندگان
چکیده
In this chapter we are concerned with interactions between particles, including air bubbles. Such interactions occurring across aqueous solutions are of special interest Ž since they determine phenomena in mineral processing, including froth flotation Leja, . 1982; Schulze, 1984 . The most important types of colloidal forces will be introduced and discussed together with short descriptions of the most commonly used techniques for studying such interactions. This field is large and subject to extensive research and the account given here is therefore necessarily very concise. The interested reader will find more extended treatments in some of the books and research articles referred to in the text. Some results obtained from surface force measurements will also be provided in order to illustrate what can be learned from such studies. In flotation we are dealing with complex systems comprising, in addition to the minerals to be separated, the gangue or non-mineral containing material, other suspended solids, electrolytes, and dissolved and adsorbed polymers. The object of the
منابع مشابه
Atomic Force Microscopy Application in Biological Research: A Review Study
Atomic force microscopy (AFM) is a three-dimensional topographic technique with a high atomic resolution to measure surface roughness. AFM is a kind of scanning probe microscope, and its near-field technique is based on the interaction between a sharp tip and the atoms of the sample surface. There are several methods and many ways to modify the tip of the AFM to investigate surface properties, ...
متن کاملFundamental understanding of goaf gas displacement in longwall goaf
Fundamental understanding of the goaf gas distribution in a gassy coal mine is necessary for developing effective goaf gas drainage strategies in the longwall coal mine. The goaf gas was subjected to the surface and body forces that were classified depending upon whether they acted on the surface area or the volume of the gas element. Of these forces, the body forces were more predominant in di...
متن کاملساخت و آزمون کارگاهی دینامومتر اتصال سه نقطه و چرخ پنجم سرعت سنج تراکتوری
For measuring draft force and drawbar power requirements for mounted implements, precise instruments such as three-point hitch dynamometers and tractor speed measurement devices are needed. In this research, a frame-type three-point hitch dynamometer was built and evaluated. Forces applied to dynamometer are measured by three separate load cells located on a frame which can be attached to tract...
متن کاملساخت و آزمون کارگاهی دینامومتر اتصال سه نقطه و چرخ پنجم سرعت سنج تراکتوری
For measuring draft force and drawbar power requirements for mounted implements, precise instruments such as three-point hitch dynamometers and tractor speed measurement devices are needed. In this research, a frame-type three-point hitch dynamometer was built and evaluated. Forces applied to dynamometer are measured by three separate load cells located on a frame which can be attached to tract...
متن کاملتعیین دقت ثبت ایمپلنت در دو روش تری باز و تری بسته و تعیین ثبت جزئیات سطح دندان حین این قالب‌گیری
Background and Aims: Accurate recording of implant location is required to achieve passive fit and have the implants without stress concentration. The aim of this in-vitro study was to evaluate the dimensional and angular accuracy of open-tray and closed-tray impression techniques using polyether impression material and also to assess the surface detail reproduction of the tooth while impressio...
متن کامل