Effect of Fe, Cu, Zr, and Ti on the Magnetic Properties of SmCo-1 : 7 Magnets - Magnetics, IEEE Transactions on
نویسندگان
چکیده
The effect of Fe, Cu, Zr, and Ti substitution on magnetic properties of SmCo 1 : 7 magnets at temperatures up to 500 C were studied. As-milled amorphous Sm(Co,Fe,Cu,Ti–Zr)7 magnets crystallized in the TbCu7-type structure after annealing at 750 C for 2 h. A room-temperature intrinsic coercivity of around 2.5 T is obtained for compositions SmCo6 4Zr0 2Ti0 4 and SmCo6 4Fe0 1Zr0 1Ti0 4. The high coercivity of the ball-milled SmCo7 Ti magnets is attributed to the strong pinning of the walls of the “interaction domains” by the network of grain boundaries between the nanocrystalline grains. The virgin curve of the ball-milled samples is suggestive of strong domain wall pinning.
منابع مشابه
Effect of Post-Sintering Annealing Treatment on Magnetic Properties of Some Nd Fe b Based Magnets
Effects of post-sintering annealing treatment between 300 and 1000ºC for up to 8 hrs time periods followed by either furnace cooling (FC) or air-cooling (AC) on the hard magnetic properties of some Nd-Fe-B based sintered magnets was investigated. It was shown that the intrinsic coercivity (Hci), second quadrant demagnetization loop shape and thus the energy density (BH)max varied considerably a...
متن کاملThe Effect of Heat Treatment on Microstructure and Magnetic Properties of Nd17Fe76.5B5Cu1.5 Type Sintered Magnets
The effects of high temperature homogenization and low temperature annealing treatments on the microstructure and magnetic properties of sintered magnets of an Nd17Fe76.5B5Cu1.5 type alloy have been investigated. The microstructure of the as-cast alloy, consisted of three phases including a Nd2Fe14B1 (2:14:1- type) matrix phase Cu-containing Nd-rich Phase and Free α-iron. The as-sintered magnet...
متن کاملThe Effect of Heat Treatment on Microstructure and Magnetic Properties of Nd17Fe76.5B5Cu1.5 Type Sintered Magnets
The effects of high temperature homogenization and low temperature annealing treatments on the microstructure and magnetic properties of sintered magnets of an Nd17Fe76.5B5Cu1.5 type alloy have been investigated. The microstructure of the as-cast alloy, consisted of three phases including a Nd2Fe14B1 (2:14:1- type) matrix phase Cu-containing Nd-rich Phase and Free α-iron. The as-sintered magnet...
متن کاملTi-based Bulk Metallic Glasses for Biomedical Applications
Biomedical materials can improve the life quality of a number of people each year. The range of applications includes such as joint and limb replacements, artificial arteries and skin, contact lenses, and dentures. So far the accepted biomaterials include metals, ceramics and polymers. The metallic biomaterials mainly contain stainless steel, Co-Cr alloys, Titanium and Ti-6Al-4V. Recently, bulk...
متن کاملTRACE ELEMENT STUDY ON THE MIXED CARBONATE-PYROCLASTIC SEDIMENTS (LOWER MIOCENE, CENTRAL BASIN, IRAN)
Geochemical investigations have permitted the refinement of the environmental interpretation of the f-Member of the Qum formation, Central Basin, Iran, which has been established through detailed microfacies (MF) analysis. The analysis revealed that the f-Member carbonates consist of eight distinct microfacies designated by the letters A through H. On the basis of petrographic characteristi...
متن کامل