Prediction and Optimal Experimental Design in Systems Biology Models
نویسنده
چکیده
منابع مشابه
New Optimal Observer Design Based on State Prediction for a Class of Non-linear Systems Through Approximation
This paper deals with the optimal state observer of non-linear systems based on a new strategy. Despite the development of state prediction in linear systems, state prediction for non-linear systems is still challenging. In this paper, to obtain a future estimation of the system states, initially Taylor series expansion of states in their receding horizons was achieved to any specified order an...
متن کاملPrediction of Vapor-Liquid Equilibria Using CEOS /GE Models
The present study investigates the use of different GE mixing rules in cubic equations of state for prediction of phase behavior of multicomponent hydrocarbon systems. To predict VLE data in multicomponent symmetric and asymmetric mixtures such as systems that contain light gases (nitrogen, carbon dioxide, etc.) and heavy hydrocarbons, the SRK equation of state has been combined with excess Gib...
متن کاملExperimental investigation, modeling, and optimization of combined electro-(fenton/coagulation/flotation) process: design of experiments and artificial intelligence systems
In this study, a combined electro-(Fenton/coagulation/flotation) (EF/EC/El) process was studied via degradation of Disperse Orange 25 (DO25) organic dye as a case study. Influences of seven operational parameters on the dye removal efficiency (DR%) were measured: initial pH of the solution (pH0), applied voltage between the anode and cathode (V), initial ferrous ion concentration (CFe), initial...
متن کاملProcess Improvement of Experimental Measurements Using D-optimal Models
In this paper, the application of D-optimal models, as an alternative to response surface models (RS models) for design of experiment (DOE) was examined. Two D-optimal models for tilt-rotors in the wind tunnel experiment, as a form of quadratic functions, were generated based on a chosen optimality criterion. This optimality criterion was used to generate the optimized sampled points in the des...
متن کاملCalibration of Bar-Concrete Bond Stress Relationships for Bond Stress Prediction of GFRP Soil Nails Using Experimental Pullout Tests
Even though steel bar is a conventional reinforcement in soil stabilization systems, the problem of corrosion of steel may lead to vast damages especially in aggressive environments. In the past decades, Fiber Reinforced Polymer (FRP) materials have offered an effective solution to overcome the corrosion problem. Despite numerous bond stress-displacement models for reinforcements in concrete, t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006