In situ imaging and strain determination during fracture in a SiC/SiC ceramic matrix composite
نویسندگان
چکیده
In situ imaging and strain determination during fracture in a SiC/SiC ceramic matrix composite J. Ramirez-Rico,a,b,⇑ F. Stolzenburg, J.D. Almer, J.L. Routbort, D. Singh and K.T. Faber Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208, USA Dpto. Fı́sica de la Materia Condensada – ICMS, Universidad de Sevilla – CSIC, 41012 Sevilla, Spain Argonne National Laboratory, Advanced Photon Source, Argonne, IL 60439, USA Argonne National Laboratory, Energy Systems Division, Argonne, IL 60439, USA Argonne National Laboratory, Nuclear Engineering Division, Argonne, IL 60439, USA
منابع مشابه
In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis
In this research, using pyrolysis of phenolic resin in the presence of silicon particles, the SiC ceramic composite is formed. The samples were prepared by introducing 30, 35, 40, 45 and 50 wt% of Si particles to the phenolic resin. The samples were cured at 180°C then carbonized at 1100°C. The final carbonized C/Si composites are hot-pressed at 1500°C in inert atmosphere, which is more than th...
متن کاملFabrication of Ti3SiC2-SiC max phase composites via in-situ and ex-situ synthesis
Recently, a series of three-component compounds with the combination of Mn+1AXn known as Max phases have been considered as a new material. One of the most important features of Max phases, is the self-healing property of them. The main reason for considering Max Phases is a unique collection of unusual properties including their metallic, ceramic, physical, and mechanical properties. One of th...
متن کاملExperimental study of fracture mechanics in the aluminum matrix composites containing Fifteen percent silicon carbide particles
In this investigation ‚the fracture toughness of A356 containing15%SiC composite was studied. Al/SiC composites have been considered because of their mechanical and erosion properties .Low fracture toughness in Al/SiC as compared with Aluminium alloys is one of its disadvantage. In this study at first A356 alloy was melted in a smelting electrical furnace then poured into the mould. A356-15% Si...
متن کاملSynthesis and Sintering of Ti3SiC2–SiC Composites through Reactive Hot-Pressing of TiC and Si Precursors
MAX phases are an attractive class of layered solids that have recently attracted a great deal of attention due to their unusual and unique composition. The ternary compound Ti3SiC2 is an example of a material that combines the properties of ceramics and metals. As a ceramic, they are high stiff. Some of them are resistant to oxidation, creep, fatigue, corrosion. They are extremely refractory a...
متن کاملLow-temperature in situ large strain plasticity of ceramic SiC nanowires and its atomic-scale mechanism.
Large strain plasticity is phenomenologically defined as the ability of a material to exhibit an exceptionally large deformation rate during mechanical deformation. It is a property that is well established for metals and alloys but is rarely observed for ceramic materials especially at low temperature ( approximately 300 K). With the reduction in dimensionality, however, unusual mechanical pro...
متن کامل