The Behaviour of Concrete by Partial Replacement of Fine Aggregate with Copper Slag and Cement with GGBS - An Experimental Study

The replacement of natural resources in the manufacture of cement and sand is the present issue in the present construction scenario. Copper slag and Ground Granulated Blast furnace Slag (GGBS) are industrial by-product materials produced from the process of manufacturing copper and iron. Use of Copper slag and GGBS does not only reduce the cost of construction but also helps to reduce the impact on environment by consuming the material generally considered as waste product. Hence in the current study an attempt has been made to minimize the cost of cement and sand with concrete mix grade M25 by studying the mechanical behavior of this concrete mix by partial replacing with advanced mineral admixtures such as Copper slag and GGBS in concrete mix. In this study, partial replacement of Cement with GGBS and Sand with Copper Slag considered. Experimental study is conducted to evaluate the workability and strength characteristics of hardened concrete, properties of concrete have been assessed by partially replacing cement with GGBS, and sand with Copper Slag. The cement has been replaced by GGBS accordingly in the range of 0% (without GGBS), 5%, 10%, 15%, and 20% by weight of cement for M25 mix. The sand has been replaced by Copper slag accordingly in the range of 0% (without Copper slag), 10%, 20%, 30%, and 40% by weight of cement for M25 mix. Concrete mixtures were produced, tested and compared in terms of compressive, flexural and split tensile strength with the conventional concrete.