Portable Analyzer for Impedance Spectroscopy
نویسندگان
چکیده
− The paper presents an impedance analyzer designed for impedance spectroscopy of objects located in the field. The use of the specialized microsystem AD5933 was assumed. The analysis and tests of the microsystem in the configuration proposed by the manufacturer showed the limitations having meaningful influence on the impedance measurement accuracy. In order to eliminate disadvantages of the microsystem, a new solution using two AD5933 microsystems was proposed. This solution allows to measure impedance in a wide range of 100 Ω ≤⎜Zx⎜≤ 10 GΩ at measurement frequencies in the range of 0,01 Hz ÷ 100 kHz.
منابع مشابه
Development of a Field-Portable Small-Size Impedance Analyzer for Structural Health Monitoring using the Electromechanical Impedance Technique
Electromechanical (E/M) impedance method is emerging as an effective and powerful technique for structural health monitoring. The E/M impedance method utilizes as its main apparatus an impedance analyzer that reads the in-situ E/M impedance of piezoelectric wafer active sensors (PWAS) attached to the monitored structure. Laboratory-type impedance analyzers (e.g. HP4194) are bulky, heavy, and ex...
متن کاملA Malaria Diagnostic System Based on Electric Impedance Spectroscopy
Malaria caused by Plasmodium falciparum infection is one of the major threats to world health and especially to the community without proper medical care. New approach to cost-efficient, portable, miniaturized diagnostic kit is needed. This work explores electric impedance spectroscopy (EIS) on a microfluidic device as a means of malaria diagnosis. This work introduces a microfabricated probe w...
متن کاملDesign and preliminary evaluation of a portable device for the measurement of bioimpedance spectroscopy.
Portable bioimpedance spectroscopy (BIS) devices are of great value for monitoring the pathological status of biological tissues in clinical and home environments. The two traditional techniques for measuring complex bioimpedance, the bridge method and quadrature demodulation method, are either time-consuming or often associated with high cost, high power consumption, and large board space, and...
متن کاملPortable SAW Impedance Sensor Using a 1-Port Resonator Approach
All actually used SAW sensors have in common that they analyze the transmission characteristics of propagating SAWs. Here, a portable device using the SAW-based impedance sensor type based on one interdigital transducer (IDT) simultaneously as SAW generator and sensor element (1-port approach) is presented. The input port reflection coefficient S11 is measured at the IDT instead of the commonly...
متن کاملLow-cost Vector Network Analyzer for Biomedical Applications
A low-cost and portable vector network analyzer (VNA) which covered operating frequency between 1MHz to 3GHz is used for vector reflection coefficient and standing wave ratio (swr) of the various microstrip antennas. This paper presents measurements of various ultra wideband (uwb) microstrip antennas for applications in biomedical field. Selection of antenna is an important key for detection of...
متن کامل