The Active Control Technical Process Optimization
نویسندگان
چکیده
The paper presents the way in which the active control can be improved via PC graphic software. It is describes an example in which for a dimensional control gauge, for different dimension shafts, the dimensional measuring can be aided by computer. In this way, all the necessary information regarding the form deviations of the shaft, could be generated and stored during the measuring process. The aided by computer measuring cycle was made depending by the establishing of some manufacturing precision, conform with the role which the manufactured and tested shaft was played for the finite product.
منابع مشابه
Oscillation Control of Aircraft Shock Absorber Subsystem Using Intelligent Active Performance and Optimized Classical Techniques Under Sine Wave Runway Excitation (TECHNICAL NOTE)
This paper describes third aircraft model with 2 degrees of freedom. The aim of this study is to develop a mathematical model for investigation of adoptable landing gear vibration behavior and to design Proportional Integration Derivative (PID) classical techniques for control of active hydraulic nonlinear actuator. The parameters of controller and suspension system are adjusted according to be...
متن کاملOptimized Fuzzy Logic for Nonlinear Vibration Control of Aircraft Semi-active Shock Absorber with Input Constraint (TECHNICAL NOTE)
Landing impact and runway unevenness have proximate consequence on performance of landing gear system and conduce to discomfort of passengers and reduction of the pilot’s capability to control aircraft. Finally, vibrations caused by them result in structure fatigue. Fuzzy logic controller is used frequently in different applications because of simplicity in design and implementation. In the pre...
متن کاملQuality Improvement Through Multiple Response Optimization (TECHNICAL NOTE)
The performance of a product is often evaluated by several quality characteristics. ptimizing the manufacturing process with respect to only one quality characteristic will not always lead to the optimum values for other characteristics. Hence, it would be desirable to improve the overall quality of a product by improving quality characteristics, which are considered to be important. The probl...
متن کاملTemperature in bone drilling process: Mathematical modeling and Optimization of effective parameters (TECHNICAL NOTE)
Bone drilling process is the most prominent process in orthopedically surgeries and curing bone breakages. It is also very common in dentistry and bone sampling operations. Due to complexity of the material that is machined, bone, and the sensitivity of the process, bone drilling is one of the most important, common and sensitive processes in biomedical engineering field. The most critical prob...
متن کاملReliability Optimization for Complicated Systems with a Choice of Redundancy Strategies (TECHNICAL NOTE)
Redundancy allocation is one of the common techniques to increase the reliability of the bridge systems. Many studies on the general redundancy allocation problems assume that the redundancy strategy for each subsystem is predetermined and fixed. In general, active redundancy has received more attention in the past. However, in real world, a particular system design contains both active and col...
متن کاملA Robust Control Strategy for Distributed Generations in Islanded Microgrids
This paper presents a robust control scheme for distributed generations (DGs) in islanded mode operation of a microgrid (MG). In this strategy, assuming a dynamic slack bus with constant voltage magnitude and phase angle, nonlinear equations of the MG are solved in the slack-voltage-oriented synchronous reference frame, and the instantaneous active and reactive power reference for the slack bus...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007