Cam Simulation for Manufacture of Forging Dies for Car Wheel Hub – a Case Study
ثبت نشده
چکیده
In the metalworking industries of the most industrially developed countries forging remains one of the dominating technologies. In order to achieve optimal performance throughout the various phases of design process, computer aided technologies must be applied extensively. Special importance is placed upon CAM simulations as an important aid in optimization of process planning. This paper is focused on application of CAM simulations as the final stage of a wider optimization process conducted in order to rationalize and enhance the conventional process of wheel hub manufacture.
منابع مشابه
EVALUATION OF FORGING PARAMETERS ON AL-7075 AIRCRAFT DOOR BRACKET BY SIMULATION
The purpose of this research is to achieve the optimal parameters for producing forged aluminium alloy 7075 aircraft door bracket by using finite element modelling (FEM) with commercial DEFORM-3D V6.1 and physical simulations with plasticine and Plexiglas dies. Also, forging speed has been examined as the main factor for controlling to produce a part without any defects. The results of Physical...
متن کاملOptimum Designing of Forging Preform Die for the H-shaped Parts Using Backward Deformation Method and Neural Networks Algorithm
In a closed die forging process, it is impossible to form complex shapes in one stage, and thus it becomes necessary to use preform dies. In the present study, Backward Deformation Method and FE simulation via ABAQUS software has been used in order to design preform die of the H-shaped parts. In the Backward Deformation Method, the final shape of the part is considered as a starting point and u...
متن کاملOptimum Designing of Forging Preform Die for the H-shaped Parts Using Backward Deformation Method and Neural Networks Algorithm
In a closed die forging process, it is impossible to form complex shapes in one stage, and thus it becomes necessary to use preform dies. In the present study, Backward Deformation Method and FE simulation via ABAQUS software has been used in order to design preform die of the H-shaped parts. In the Backward Deformation Method, the final shape of the part is considered as a starting point and u...
متن کاملTopological model for machining of parts with complex shapes
Complex shapes are widely used to design products in several industries such as aeronautics, automotive and domestic appliances. Several variations of their curvatures and orientations generate difficulties during their manufacturing or the machining of dies used in moulding, injection and forging. Analysis of several parts highlights two levels of difficulties between three types of shapes: pr...
متن کاملThe Review Study of Forging and Effects on the Produced Part
There are several method for forming bulk material, such as forging, rolling and extrusion. Every of these methods have advantages and dis-advantages of their selves. Forging process is one of the most common of them that include a die, press and in some case heater with controlling system, and has a special place in automotive, military and aerospace industries due uniformity of the final prod...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010