Bacterial resistance to ultrasonic waves under pressure at nonlethal (manosonication) and lethal (manothermosonication) temperatures.
نویسندگان
چکیده
The decimal reduction times of Streptococcus faecium, Listeria monocytogenes, Salmonella enteritidis, and Aeromonas hydrophila corresponding to heat treatment at 62 degrees C were 7.1, 0.34, 0.024, and 0.0096 min, and those corresponding to manosonication treatment (40 degrees C, 200 kPa, 117 microm) were 4.0, 1.5, 0.86, and 0.90 min, respectively. The manosonication decimal reduction times of the four species investigated decreased sixfold when the amplitude was increased from 62 to 150 microm and fivefold when the relative pressure was raised from 0 to 400 kPa. In L. monocytogenes, S. enteritidis, and A. hydrophila, the lethal effect of manothermosonication was the result of the addition of the lethal effects of heat and manosonication, whereas in S. faecium it was a synergistic effect.
منابع مشابه
Comparative Resistance of Bacterial Foodborne Pathogens to Non-thermal Technologies for Food Preservation
In this paper the resistance of bacterial foodborne pathogens to manosonication (MS), pulsed electric fields (PEFs), high hydrostatic pressure (HHP), and UV-light (UV) is reviewed and compared. The influence of different factors on the resistance of bacterial foodborne pathogens to these technologies is also compared and discussed. Only results obtained under harmonized experimental conditions ...
متن کاملAn Estimation of Wave Attenuation Factor in Ultrasonic Assisted Gravity Drainage Process
It has been proved that ultrasonic energy can considerably increase the amount of oil recovery in an immiscible displacement process. Although many studies have been performed on investigating the roles of ultrasonic waves, based on the best of our knowledge, little attention has been paid to evaluate wave attenuation parameter, which is an important parameter in the determination of the energy...
متن کاملNew-emerging approach for fabrication of near net shape aluminum matrix composites/nanocomposites: Ultrasonic additive manufacturing
Recently, high-performance lightweight materials with outstanding mechanical properties have opened up their way to some sophisticated industrial applications. As one of these systems, aluminum matrix composites/nanocomposites (AMCs) offer an outstanding combination of relative density, hardness, wear resistance, and mechanical strength. Until now, several additive manufacturing methods have be...
متن کاملبررسی اثر مهار جانبی اِستادهای دیوار بر روی تابع مقاومت ایستایی اِستادها تحت بار انفجار
“Cold-formed steel (CFS) stud walls” are innovative alternative for construction of walls in buildings. The main frames of CFS walls consist of a group of vertical members called “studs” which are hold by fasteners within two horizontal members called “tracks” at the upper and lower ends. One of the conventional ways for designing and analyzing of CFS stud walls under blast loading is to employ...
متن کاملکاربردهای روش فرا صوت در ارزیابی موتور های پیشرانه جامد(علمی-ترویجی)
Ultrasonic technique, is one of the best nondestructive techniques for solid propellants motors evaluation. In this article ultrasonic technique use, has been reported for measuring solid propellant burning rate at different pressure with just one experiment and at the moment, for especial motors. The use of swept frequency method in a proper confine frequency and interrupted frequency method h...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied and environmental microbiology
دوره 65 1 شماره
صفحات -
تاریخ انتشار 1999