voltammetric and potentiometric behavior of 2-pyridinethiol, 2-mercaptoethanol and sulfide at iron(ii) phtalocyanine modified carbon-paste electrode
نویسندگان
چکیده
a carbon-past electrode modified with iron(ii) phathalocyanine (fepc) was used as a sensitive potentiometric sensor for determination of 2-pyridinethiol (2pt). 2-mercaptoethanol (2me) and sulfide ion in aqueous solutions. the modified electrode acts as an electrocatalyst for oxidation of these compounds, and lowers the overpotential for oxidation reactions by more than 400 mv, compared to the unmodified electrode. the process was dependent on the ph of the supporting electrolyte. the fast rate of electron transfer results in a near-nernstian behavior of the modified electrode, and makes it a suitable potentiometric sensor for measurement of these compounds. calibration studies were performed using potentiometry in oxygen or air saturated stirred solutions; linear responses were obtained over the range of about 1´10-6 to 5´10-3 m (correlation coefficients, r, of ~0.999, n=8). the modified electrode exhibited a fast response time (< 20 s), good stability, and has an extended lifetime; the standard deviation of slopes, during a period of two months, was 1.7-2.4% (n=10). appropriate electrochemical and analytical data are presented.
منابع مشابه
Voltammetric and Potentiometric Behavior of 2-Pyridinethiol, 2-Mercaptoethanol and Sulfide at Iron(II) Phtalocyanine Modified Carbon-Paste Electrode
A carbon-past electrode modified with iron(II) phathalocyanine (FePc) was used as a sensitive potentiometric sensor for determination of 2-pyridinethiol (2PT). 2-mercaptoethanol (2ME) and sulfide ion in aqueous solutions. The modified electrode acts as an electrocatalyst for oxidation of these compounds, and lowers the overpotential for oxidation reactions by more than 400 mV, compared to t...
متن کاملVoltammetric determination of cysteine at a carbon paste electrode modified with Cu(II)-salen complex
The electrochemical behavior of a modified carbon paste electrode (MCPE) with N,N′ethylenbis(salicylideneiminato)copper(II) complex ([Cu(II)-Salen]) was investigated as a newsensor for cystein. The Britton-Robinson buffer with pH 5, 10% modifier in electrode, potentialscanning rate of 20 mVs-1 and puls height of 50 mV were used as the optimum condition for thedetermination of cysteine using car...
متن کاملAdsorptive Behavior and Voltammetric Determination of Hydralazine Hydrochloride at A Glassy Carbon Electrode Modified with Multiwalled Carbon Nanotubes
An electroanalytical method has been introduced for highly sensitive determination of hydralazine hydrochloride (Hy-HCl) based on its oxidation at a glassy carbon electrode modified with multiwalled carbon nanotubes (MWCNT/GCE). Studies showed that the electrochemical oxidation of Hy-HCl was accompanied by adsorption and highly sensitive responses could be achieved by adsorptive stripping volta...
متن کاملAdsorptive Behavior and Voltammetric Determination of Hydralazine Hydrochloride at A Glassy Carbon Electrode Modified with Multiwalled Carbon Nanotubes
An electroanalytical method has been introduced for highly sensitive determination of hydralazine hydrochloride (Hy-HCl) based on its oxidation at a glassy carbon electrode modified with multiwalled carbon nanotubes (MWCNT/GCE). Studies showed that the electrochemical oxidation of Hy-HCl was accompanied by adsorption and highly sensitive responses could be achieved by adsorptive stripping volta...
متن کاملElectrochemical Behavior and Voltammetric Determination of a Manganese(II) Complex at a Carbon Paste Electrode
Investigation of the electrochemical behavior using cyclic voltammetry and detection of [Mn(2+)(thiophenyl-2-carboxylic acid)2 (triethanolamine)] with adsorptive stripping differential pulse voltammetry. The electrochemical behavior of a manganese(II) complex [Mn(2+)(thiophenyl-2-carboxylic acid)2(triethanolamine)] (A) was investigated using cyclic and differential pulse voltammetry in an aceta...
متن کاملMultiwall Carbon Nanotubes Modified Carbon Paste Electrode for Determination of Copper(II) by Potentiometric and Impedimetric Methods
A chemically modified carbon paste electrode with multiwall carbon nanotube (MWCNT) was prepared and used as a sensor for Cu2+ ion. The unique chemical and physical properties of CNT have paved the way to new and improved sensing devices. A central composite chemometrics design was applied for multivariate optimization of the effects of three significant parameters (...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
iranian journal of chemistry and chemical engineering (ijcce)ناشر: iranian institute of research and development in chemical industries (irdci)-acecr
ISSN 1021-9986
دوره 20
شماره 1 2001
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023