damping behavior of the phenolic based composite friction materials containing thermoplastic elastomers (tpes)

نویسندگان

mohsen masoomi

ali asghar katbab

hossein nazockdast

چکیده

attempts have been made for the first time to produce a friction material with thermal sensitive modulus by the inclusion of combined plastic/rubber properties of thermoplastic elastomers (tpe) as viscoelastic polymeric materials into the formulation for the purpose of increasing the damping behavior. in order to evaluate the viscoelastic parameters such as loss factor (tan δ) and elastic modulus (e’) for the friction material, dynamic mechanical analyzer (dma) was used. styrene-butadiene-styrene (sbs), styrene-ethylene-butylene-styrene (sebs) and nitrile rubber/polyvinyl chloride (nbr/pvc) blend systems were used as tpe materials. however, nbr/pvc and sebs were found to be more effective in damping behavior. all the friction materials containing tpes exhibited more damping behavior at a wide range of temperature compared with the reference sample.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Damping Behavior of the Phenolic Based Composite Friction Materials Containing Thermoplastic Elastomers (TPEs)

Attempts have been made for the first time to produce a friction material with thermal sensitive modulus by the inclusion of combined plastic/rubber properties of thermoplastic elastomers (TPE) as viscoelastic polymeric materials into the formulation for the purpose of increasing the damping behavior. In order to evaluate the viscoelastic parameters such as loss factor (tan δ) and elastic m...

متن کامل

Synthesis of bio-based thermoplastic polyurethane elastomers containing isosorbide and polycarbonate diol and their biocompatible properties.

A new family of highly elastic polyurethanes (PUs) partially based on renewable isosorbide were prepared by reacting hexamethylene diisocyanate with a various ratios of isosorbide and polycarbonate diol 2000 (PCD) via a one-step bulk condensation polymerization without catalyst. The influence of the isorsorbide/PCD ratio on the properties of the PU was evaluated. The successful synthesis of the...

متن کامل

Mechanical Behavior of Hybrid Composite Phenolic Foam

Amit Desai, Maria L. Auad, 1 Hongbin Shen and Steven R. Nutt* Gill Foundation Composites Center, Department of Chemical Engineering and Materials Science, University of Southern California, 3651 Watt Way VHE-602, Los Angeles, CA 90089-0241, USA * E-mail: [email protected] Abstract: Hybrid composite phenolic foams are reinforced with chopped glass and aramid fibers in varied proportions. The mechanic...

متن کامل

Friction Testing of Thermoplastic Composites

ULRICH SACHS MSc , SEBASTIAAN HAANAPPEL MSc , Dr. BERT RIETMAN (b) and Prof. REMKO AKKERMAN (a),(b) a) TPRC, University of Twente, Drienerlolaan 5, P.O. Box 217, 7500AE Enschede, the Netherlands, www.tprc.nl, [email protected], [email protected], [email protected] . b) Faculty of Engineering Technology, Chair of Production Technology, University of Twente, Drienerlolaan 5, P.O. Box ...

متن کامل

Thermoplastic Elastomers with Photo-actuating Properties

This contribution reviews elastomeric materials with photo-actuation behavior with emphasis on thermoplastic elastomers and their composites. The principles of the photo-actuation and the main factors affecting the photo-actuation phenomena of thermoplastic elastomer materials are discussed in detail. The well-performing photoactuating systems involving both statistical and block copolymers-bas...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
iranian journal of chemistry and chemical engineering (ijcce)

ناشر: iranian institute of research and development in chemical industries (irdci)-acecr

ISSN 1021-9986

دوره 25

شماره 3 2006

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023