parametric study of operation and performance of a pem fuel cell using numerical method

نویسندگان

mehdi seddiq

hassan khaleghi

masaud mirzaei

چکیده

output characteristics of fuel cells are affected by a large number of parameters such as geometry, dimensions, construction materials and conditions of supplying fluids. in this paper a mathematical model followed by a two-dimensional numerical approach has been presented to study the fuel cell parametrically. effect of oxygen concentration at gas diffusion layer entrance, temperature and pressure of the fluid in channels and thickness of membrane for various current densities were studied. the results show that increasing pressure and input oxygen concentration as well as decreasing membrane thickness improve power density and raise limiting current density.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Parametric Study of Operation and Performance of a PEM Fuel Cell Using Numerical Method

Output characteristics of fuel cells are affected by a large number of parameters such as geometry, dimensions, construction materials and conditions of supplying fluids. In this paper a mathematical model followed by a two-dimensional numerical approach has been presented to study the fuel cell parametrically. Effect of oxygen concentration at gas diffusion layer entrance, temperature and ...

متن کامل

Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell

An electrochemical analysis on a single channel PEM fuel cell was carried out by Computational Fuel Cell Dynamics (CFCD). The objective was to assess the latest developments regarding the effects of change in the current collector materials, porosity of electrodes and gas diffusion layer on the fuel cell power density. Graphite, as the most applicable current collector material, was applied fol...

متن کامل

Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance

In a polymer membrane fuel cell more than half of the chemical energy of hydrogen is converted to heat during generation of electricity. This causes an increase in the cell temperature. The Cooling field design has a significant role in cell cooling. The cell's performance and stability are reduced due to inappropriate heat dissipation. In this paper, the cooling flow and heat transfer in cooli...

متن کامل

Dynamics of Autohumidifed PEM Fuel Cell Operation

Start-up and dynamic responses to changes in load are reported for a dry feed, autohumidified polymer electrolyte membrane fuel cell PEMFC . The fuel cell current can be ignited by water injection; criteria are derived for the required water injection as functions of fuel cell size, temperature, and reactant feed rates. Steady-state multiplicity is observed where the fuel cell current can be ei...

متن کامل

Performance modeling and parametric investigation of a solid oxide fuel cell (SOFC)

In his paper, performance modeling and parametric study of a tubular solid oxide fuel cell (SOFC) fed by hydrogen was conducted. The components of the fuel cell system and its reactions were entirely modelled and an electrochemical analysis done for it. A variety of modeling parameters including temperature, working pressure and the air mass- flow rate have been investigated in order to observe...

متن کامل

Numerical Study of Microfluidic Fuel Cell Performance

Using COMSOL Multiphysics 3.5, a numerical model has been developed to determine the effect of the channel geometry and electrode configuration on cell performance based on polarization curves. The Butler-Volmer equation was implemented to determine the reaction rates at the electrodes. The Conductive Media DC module is used to model the electric fields within the fuel cell. The concentration d...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
iranian journal of chemistry and chemical engineering (ijcce)

ناشر: iranian institute of research and development in chemical industries (irdci)-acecr

ISSN 1021-9986

دوره 27

شماره 2 2008

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023