the effect of epoxy-polysulfide copolymer curing methods on mechanical-dynamical and morphological properties

نویسندگان

majid abdouss

tohid farajpour,

morteza derakhshani

چکیده

epoxy – polysulfide copolymers without or with low amounts of epoxy in their structure have poor mechanical properties in oxidative curing system.to strengthen the mechanical properties of polysulfide elastomer inclusion of epoxy resin (epon828) as hard segment was studied. ft-ir spectroscopy and rheometry were used to verify the formation of epoxy-polysulfide copolymer.  results obtained from dmta showed that in different epoxy/polysulfide ratio, the epoxy-polysulfide copolymer had different glass transition temperature (tg). gel time and curing behaviors in various ratios of epoxy – polysulfide were investigated using rheometer and differential scanning calorimeter (dsc). with increasing polysulfide weight percent in epoxy - polysulfide copolymer gel time increased but the enthalpy of cure reaction decreased and the temperature corresponding to exothermic peak was shifted to the higher temperature. results obtained from dmta and sem showed that phase separation of epoxy resin from the copolymer matrix took place

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effect of Epoxy-Polysulfide Copolymer Curing Methods on Mechanical-Dynamical and Morphological Properties

Epoxy – Polysulfide copolymers without or with low amounts of epoxy in their structure have poor mechanical properties in oxidative curing system.To strengthen the mechanical properties of polysulfide elastomer inclusion of epoxy resin (Epon828) as hard segment was studied. FT-IR spectroscopy and rheometry were used to verify the formation of epoxy-polysulfide copolymer.  Results obtained f...

متن کامل

Study the curing behavior and mechanical properties of Pigmented UV curable epoxy acrylate monomers

The formulations contained different acrylate monomer with different structure and functionalities and TiO2, were applied to obtain pigmented acrylic films by UV exposure. The conversion and mechanical characteristic were correlated. The results showed that there is a significant interaction between pigment, reactive diluents’ type and mechanical properties of coatings. It seems that cured film...

متن کامل

Investigating the Effect of Modifier Chain Length on Insulation Properties of Polysulfide Modified Epoxy Resin

Polysulfide resins,with trade name of  G4 and G112, with short and long chain lengths respectively, were used as reactive modifiers to toughen epoxy resin. The effects of molecular weights of G4 and G112 on impact resistance, dielectric constant, thermal conductivity as well as decomposition  heat and adhesion properties of toughened epoxy were investigated. The impact strength and the diel...

متن کامل

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

15 صفحه اول

on the comparison of keyword and semantic-context methods of learning new vocabulary meaning

the rationale behind the present study is that particular learning strategies produce more effective results when applied together. the present study tried to investigate the efficiency of the semantic-context strategy alone with a technique called, keyword method. to clarify the point, the current study seeked to find answer to the following question: are the keyword and semantic-context metho...

15 صفحه اول

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
iranian journal of chemistry and chemical engineering (ijcce)

ناشر: iranian institute of research and development in chemical industries (irdci)-acecr

ISSN 1021-9986

دوره 30

شماره 4 2011

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023