an electrochemical measurement for evaluating the cathodic disbondment of buried pipeline coatings under cathodic protection

An Electrochemical Measurement for Evaluating the Cathodic Disbondment of Buried Pipeline Coatings under Cathodic Protection

Steel pipelines are susceptible to corrosion by the action of corrosive substance in the environment and one of the most common failure modes in buried pipeline coatingis cathodic disbondment. Consequently, Electrochemical Impedance Spectroscopy (EIS) was used to assess the effect of three important parameters, the thickness of coating, the artificial defect ...

APPLIED OF IMPRESSED CURRENT CATHODIC PROTECTION DESIGN FOR FUEL PIPELINE NETWORK AT NAVAL BASE

Indonesian Navy (TNI AL) is the main component for Maritime Security and Defence. Because of that, TNI AL needs Indonesian Warship (KRI) to covered Maritime area. The main requirement from KRI is fulfilled by demand. To pock of fuel demand from KRI at Naval Base, it needs a new pipeline of fuel distribution network system. The pipeline network system used for maximum lifetime must be protected ...

Electrochemical Impedance Spectroscopy as a Method to Predict Delamination of Coated Steel in Cathodic Disbondment Tests

A study was undertaken using electrochemical impedance spectroscopy to measure delamination and compare that measurement, which can be performed on the sample repeatedly, with the accepted method of cathodic disbondment (CD) testing, the major drawback of which is that this measurement can only be done once on the sample; in reaching this goal, EIS could be used to predict delamination based on...

Maintenance of Cathodic Protection Systems

4.18 Principles of Cathodic Protection

4.18.1 Historical Background 2747 4.18.2 Electrochemical Principles 2748 4.18.2.1 Aqueous Corrosion 2748 4.18.2.2 Cathodic Protection 2748 4.18.2.3 Oxygen Reduction 2749 4.18.2.4 Hydrogen Evolution 2750 4.18.3 Methods of Applying Cathodic Protection 2751 4.18.3.1 Impressed Current Method 2751 4.18.3.2 Sacrificial Anodes 2752 4.18.4 Proof of Protection 2753 4.18.4.1 Steel 2753 4.18.4.2 Other Met...

Energy Management Strategy of Stand-alone Photovoltaic System in Cathodic Protection Pipeline

‎ In this paper, the stand-alone photovoltaic system for cathodic protection of underground pipelines is presented. The proposed system offers continuous and automatic adjustment of the applied voltage so that the buried pipelines receive the exact current. A modified perturb and observe (P&O) algorithm for maximum power point tracking (MPPT) is used to improve dynamic and steady state performa...