designing tolerance chart and process for cnc machining parts

نویسندگان

mohammad ali farsi

چکیده

the map and the model designed by a designer and presented to a manufacturer in the form of a map is the result of his knowledge and innovation. the manufacturer, in turn, uses his best effort to produce a part accordingly. however, because of production problems and raw material, producing a precise part is very difficult and costly. one of the most important problems in this regard is designing the production process and tolerances for each stage in order to determine the final tolerance for the part. the solution to this problem lies in deciding on the priority of stages of operation and using tolerance chart. selecting stages of machining and effective parameters like the depth of machining is important. each stage of machining has its own tolerance, and in the end, when all tolerances are added up, the final tolerance might be more than the permitted assigned tolerance on the map. to prevent cumulative tolerance and reduce the production waste, it is necessary to decide on the tolerances for each stage (tolerance chart). using software systems for this purpose not only increases speed and precision significantly but also reduces expenses to a large extent. a software has been designed for determing stages of machining and permitted tolerance for each operation (tolerance chart), and its efficiency is demonstrated in this article by using an example.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Designing Tolerance Chart and Process for CNC Machining Parts

The map and the model designed by a designer and presented to a manufacturer in the form of a map is the result of his knowledge and innovation. The manufacturer, in turn, uses his best effort to produce a part accordingly. However, because of production problems and raw material, producing a precise part is very difficult and costly. One of the most important problems in this regard is designi...

متن کامل

Designing Tolerance Chart and Process for CNC Machining Parts

The map and the model designed by a designer and presented to a manufacturer in the form of a map is the result of his knowledge and innovation. The manufacturer, in turn, uses his best effort to produce a part accordingly. However, because of production problems and raw material, producing a precise part is very difficult and costly. One of the most important problems in this regard is designi...

متن کامل

-axis CNC machining of sculptured parts

As an innovative and cost-effective method for carrying out multiple-axis CNC machining, 3 1 2 1 2 -axis CNC machining technique adds an automatic indexing/rotary table with two additional discrete rotations to a regular 3-axis CNC machine, to improve its ability and efficiency for machining complex sculptured parts. In this work, a new tool path generation method to automatically subdivide a c...

متن کامل

Automated Process Planning for CNC Machining

A large portion of today’s industrial manufacturing relies on subtractive machining, a process in which a fast-spinning tool successively removes material from raw stock, for example, a block of aluminum, in order to arrive at a part geometry as specified by a design engineer in a computer-aided design (CAD) file. Planning for this process typically involves identifying the sequence of orientat...

متن کامل

Process-based tolerance assessment of connecting rod machining process

Process tolerancing based on the process capability studies is the optimistic and pragmatic approach of determining the manufacturing process tolerances. On adopting the define–measure–analyze–improve–control approach, the process potential capability index (C p) and the process performance capability index (C pk) values of identified process characteristics of connecting rod ...

متن کامل

Modeling of CNC Machining Process - Artificial Neural Networks Approach

CNC machining is known as an advanced machining process increasingly used for modern materials. This paper outlines modeling methodology applied to optimize cutting parameters during CNC milling with ball end mill tool. The parameters taken into account were radial depth of cut and feed per tooth. A predictive model was based on artificial neural network approach. Key-Words: Modeling, artificia...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of modern processes in manufacturing and production

ناشر: islamic azad univesity, najafabad branch

ISSN

دوره 2

شماره 2 2013

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023