cfd application in 3d flow filed modeling of a large dam reservoir
نویسندگان
چکیده
in the present paper, a 3d numerical model has been applied to predict the flow hydrodynamics around power intakes within the dez dam reservoir. the dez dam is a 203 m high, double arch concrete dam which is constructed by italians in 1962. since then, sedimentation in reservoirhas continued and since the dam does not have bottom outlet, the reservoir bed level is raising by a rate of about 2.5 meter per year. the power intake invert level is in 270 m asl and on the basis of 2007 hydrography results, the reservoir bed level has reached the level of 260 m asl that means the sediment level is just 10 meters below the power tunnel intakes. the applied three dimensional model is a finite volume model, which can model curvilinear and non-orthogonal domains and uses the fully 3d time averaged navier stocks equations. for incorporating the effects of turbulent flow in computations, an advanced turbulent model, named k −w model has been applied. the present model results for flow field around power intakes show that for the present conditions (sediment level of 260 m and intakes level of 270 m ) some limited amount ofsediments is entering power tunnels and if no rehabilitation measures is considered, more sediment will enter the power tunnels in the coming years.
منابع مشابه
CFD Application in 3D flow filed modeling of a large dam reservoir
In the present paper, a 3D numerical model has been applied to predict the flow hydrodynamics around power intakes within the Dez dam reservoir. The Dez dam is a 203 m high, double arch concrete dam which is constructed by Italians in 1962. Since then, sedimentation in reservoirhas continued and since the dam does not have bottom outlet, the reservoir bed level is raising by a rate of about 2.5...
متن کاملeffect of sub-grid scales on large eddy simulation of particle deposition in a turbulent channel flow
چکیده ندارد.
15 صفحه اولAn Application to Dam-Reservoir Projects
The use of cost-benefit analysis to evaluate the net welfare payoffs from water projects has now been an established practice for many years. One of the interesting aspects of such cost-benefit studies is that water projects involve an uncertain flow of costs and benefits, arising from the stochastic nature of streamflows. Hence a basic problem for the cost-benefit analyst is that of incorporat...
متن کاملCFD-Calculation of Fluid Flow in a
An accurate description of the fluid flow and heat transfer within a Pressurized Water Reactor (PWR), for the safety analysis and reactor performance is always desirable. In this paper a mathematical model of the fundamental physical phenomena which are associated to a typical PWR is presented. The mathematical model governs the fluid dynamics in the reactor. Using commercial software CFX, a co...
متن کامل3D and 4D Seismic Data Integration in Static and Dynamic Reservoir Modeling: A Review
Reservoir modeling is the process of generating numerical representations of reservoir conditions and properties on the basis of geological, geophysical, and engineering data measured on the Earth’s surface or in depth at a limited number of borehole locations. Therefore, reservoir modeling requires an incorporation of the data from a variety of sources, along with an integration of knowledge a...
متن کاملApplication of M3GM in a Petroleum Reservoir Simulation
Reservoir formations exhibit a wide range of heterogeneity from micro to macro scales. A simulation that involves all of these data is highly time consuming or almost impossible; hence, a new method is needed to meet the computational cost. Moreover, the deformations of the reservoir are important not only to protect the uppermost equipment but also to simulate fluid pattern and petroleum produ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
journal of water sciences researchISSN 2251-7405
دوره 2
شماره 2 2010
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023