nanocrystallization in co67cr7fe4si8b14 amorphous alloy ribbons
نویسندگان
چکیده
the nanocrystallization of co67fe4cr7si8b14 amorphous ribbons which prepared by planar flow melt spinning process (pfms) was investigated. crystallization of the ribbons was studied by differential thermal analysis (dta), x-ray diffraction (xrd) and transmission electron microscopy (tem). the dta result of amorphous ribbon at heating rate of 10˚c/min showedoccurrence of phase transitions in two stages. the ribbons were isothermally annealed for 30 minutes in argon atmosphere at different temperatures between 300 and 650ºc with 25ºc steps. the magnetic properties of annealed samples were measured using a vibrating sample magnetometer (vsm). the vsm results revealed that optimum soft magnetic properties occurred at 400ºc. xrd patterns showed that the samples isothermally annealed up to 450ºc were amorphous, while tem results at 400ºc indicated 7-8 nm mean size nanocrytallites in amorphous matrix and size of the nanocrystallites increased by increasing temperature. also by x-ray diffraction pattern, precipitation of different phases at higher temperatures confirmed.
منابع مشابه
Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons
The nanocrystallization of Co67Fe4Cr7Si8B14 amorphous ribbons which prepared by planar flow melt spinning process (PFMS) was investigated. Crystallization of the ribbons was studied by differential thermal analysis (DTA), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The DTA result of amorphous ribbon at heating rate of 10˚C/min showedoccurrence of phase transitions in two...
متن کاملKINETICS OF -Fe NANOCRYSTALLIZATION IN Fe55Cr18Mo7B16C4 BULK AMORPHOUS ALLOY
Abstract: In this research work, crystallization kinetics of Fe55Cr18Mo7B16C4 alloy was evaluated by X-ray diffraction, TEM observations and differential scanning calorimetric tests. In practice, crystallization and growth mechanisms were investigated using DSC tests in four different heating rates. Results showed that a two -step crystallization process occurred in the alloy in which - Fe phas...
متن کاملNANOCRYSTALLIZATION MECHANISMS OF Fe52Cr18Mo7B16C4Nb3 BULK AMORPHOUS STEEL
Crystallization kinetics of Fe52Cr18Mo7B16C4Nb3 alloy was evaluated using X-ray diffraction, differential scanning calorimetric (DSC) tests and TEM observations in this research work. In effect, crystallization and growth mechanisms were investigated using DSC tests in four different heating rates (10, 20, 30, 40 K/min) and kinetic models (i.e. Kissinger- Starink, Ozawa, and Matusita methods). ...
متن کاملKinetics of Mg6Ni nanocrystallization in amorphous Mg83Ni17
A comprehensive crystallization kinetics study was carried out in order to understand the mechanism of formation of a Mg-rich nanocrystalline Mg6Ni phase in a metallic glass with similar overall composition, Mg83Ni17. Adequate description of the transformation kinetics was obtained by the JMKA equation with an integer Avrami exponent n = 4, associated with nucleation and three-dimensional linea...
متن کاملNanocrystallization during nanoindentation of a bulk amorphous metal alloy at room temperature.
It is known that nanocrystallites can form in shear bands produced during severe bending or high-energy ball milling of thin ribbons of a metallic glass. We present direct experimental evidence that highly confined and controlled local contact at the ultrafine scale in the form of quasi-static nanoindentation of a bulk glassy metal alloy at room temperature can also cause nanocrystallization. A...
متن کاملCrystallization Kinetics Study in Al87Ni10La3 Amorphous Alloy
In this study, the crystallization behavior of melt-spun Al87Ni10La3 amorphous phase was investigated by using X-ray diffraction and non-isothermal differential thermal analysis techniques. The results demonstrated that the amorphous phase exhibited two-stage crystallization on heating, i.e., at first step the amorphous phase transforms into α-Al phase and at second step Al11La3 and Al3Ni inter...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
journal of ultrafine grained and nanostructured materialsناشر: university of tehran college of engineering
ISSN 2423-6845
دوره 46
شماره 1 2013
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023