fabrication of 1, 1-dimethylhydrazine gas sensor based on nano structure conducting polyaniline
نویسندگان
چکیده
determination of 1, 1-dimethylhydrazine (dmh) in air is carried out by spectrophotometry, gc or hplc analysis, but in this study dmh was analyzed by a gas sensor based on nanostructure conducting polyaniline. determination of dmh has been done very simplely and quickly in recent work. electrically conductive fibers have been prepared by polymerization of aniline on surfaces of commercial polymer fibers in the presence of an oxidizing agent. the resistance of poly aniline (pani) coated fiber sensor (pani-fs) was investigated and related to coating conditions, which was controlled by adjusting the reactant concentrations. the morphology of the conducting film on the surface of the fibers was examined by scanning electron microscope (sem). the sensing behavior of pani in the presence of some volatile organic compounds (vocs) is studied experimentally. the pani sensor had demonstrated to have good sensitivity for dmh and good reproducibility when reused.
منابع مشابه
Fabrication of 1, 1-Dimethylhydrazine Gas sensor Based on Nano Structure Conducting Polyaniline
Determination of 1, 1-dimethylhydrazine (DMH) in air is carried out by spectrophotometry, GC or HPLC analysis, but in this study DMH was analyzed by a gas sensor based on nanostructure conducting polyaniline. Determination of DMH has been done very simplely and quickly in recent work. Electrically conductive fibers have been prepared by polymerization of aniline on surfaces of commercial polyme...
متن کاملFabrication of sub-100 nm conducting polyaniline wire on a polymer substrate based on friction nanolithography.
Friction Nanolithography (FRNL) is used to fabricate polyaniline nano-wire on a flexible, insulating, and highly transparent substrate. FRNL uses SPM tip to scratch the substrate to form a trench with higher friction force. Polyaniline nano-wire is selectively deposited on the trench. Sub-100 nm polyaniline wire is fabricated based on FRNL.
متن کاملElectrochemical DNA biosensor based on conducting polyaniline nanotube array.
Most of the recent developments in ultrasensitive detection of nucleic acid are based on the gold nanoparticles and carbon nanotubes as a medium of signal amplification. Here, we present an ultrasensitive electrochemical nucleic acid biosensor using the conducting polyaniline (PANI) nanotube array as the signal enhancement element. The PANI nanotube array of a highly organized structure was fab...
متن کاملFacile Fabrication of Multi-hierarchical Porous Polyaniline Composite as Pressure Sensor and Gas Sensor with Adjustable Sensitivity
A multi-hierarchical porous polyaniline (PANI) composite which could be used in good performance pressure sensor and adjustable sensitivity gas sensor has been fabricated by a facile in situ polymerization. Commercial grade sponge was utilized as a template scaffold to deposit PANI via in situ polymerization. With abundant interconnected pores throughout the whole structure, the sponge provided...
متن کاملA Layered SAW Gas Sensor Based on a Polyaniline/In2O3 Nanofiber Composite
A polyaniline/In2O3 nanofiber composite based layered surface acoustic wave (SAW) sensor has been developed and investigated towards different gases. Chemical oxidative polymerization of aniline in the presence of finely divided In2O3 was employed to synthesize a polyaniline nanofiber/In2O3 nanoparticle composite. The nanocomposite was deposited onto a layered ZnO/64° YX LiNbO3 SAW transducer. ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
journal of sciences, islamic republic of iranناشر: university of tehran
ISSN 1016-1104
دوره 24
شماره 3 2013
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023