structural characterization of ba1.„sr„tio3 (bst) nanopowders prepared by stearic acid gel method
نویسندگان
چکیده
stoichiometric tetragonal bal-xsrxtio3 (x = 0.23) nanopowders were prepared by stearic acid gel(sag) method using barium stearate, strontium stearate, tetrabutyl titanate as ba, sr, ti sourcesand stearic acid as complexing reagent. thermal analysis including differential thermogravimetric(dtg) and tg, fourier transform infrared spectrometry (ftir), x-ray diffraction (xrd) andtransmission electron microscopy (tem) were used to characterize the crystallization process,particle size and morphology of the calcined powders. the results indicated that single- phasetetragonal and well crystallized bal-xsrxtio3 (x = 0.23) nanopowders with particle size around45 nm were formed after calcining the dried gel at 700 °c for 2 h.pacs code: 81,07wx
منابع مشابه
Structural characterization of Ba1.„Sr„TiO3 (BST) nanopowders prepared by stearic acid gel method
Stoichiometric tetragonal Bal-xSrxTiO3 (x = 0.23) nanopowders were prepared by stearic acid gel(SAG) method using barium stearate, strontium stearate, tetrabutyl titanate as Ba, Sr, Ti sourcesand stearic acid as complexing reagent. Thermal analysis including differential thermogravimetric(DTG) and TG, Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD) andtransmission electr...
متن کاملStructural characterization of BaZrO3 nanopowders prepared by stearic acid gel method
Pure barium zirconate nanopowders were successfully prepared in wet-chemistry synthesismethod, using barium stearate and tetra-n-butyl zirconate as Ba, Zr sources and stearic acid ascomplexing reagent. The gel was calcined at 800 and 900 °C in air. Results of thermal analysisare given, including both DTG and TG. Fourier transform infrared spectrometry (FTIR), X-raydiffraction (XRD), transmissio...
متن کاملstructural characterization of bazro3 nanopowders prepared by stearic acid gel method
pure barium zirconate nanopowders were successfully prepared in wet-chemistry synthesismethod, using barium stearate and tetra-n-butyl zirconate as ba, zr sources and stearic acid ascomplexing reagent. the gel was calcined at 800 and 900 °c in air. results of thermal analysisare given, including both dtg and tg. fourier transform infrared spectrometry (ftir), x-raydiffraction (xrd), transmissio...
متن کاملSynthesis and Characterization of PbTiO3 Nanopowders by Citric Acid Gel Method
High purity lead titanate nanopowders in tetragonal form have been successfully prepared bycitric acid gel method using lead nitrate and tetra-n-butyl titanate as Pb and Ti sourcesrespectively and citric acid as complexing reagent. The precursors were calcined at varioustemperatures ranging from 450 °C to 600 °C for 2 h. Fourier Transform InfraredSpectroscopy (FT-IR), X-ray diffraction (XRD) an...
متن کاملSynthesis, characterization, of Fluorohydroxyapatite nanopowders by sol-gel processing
In this work, sol-gel processing was used to synthesize the fluorohydroxyapatite (nano-FHA, Ca10(PO4)6(OH)2−xFx) nanopowders. The advantages of the sol-gel method over other methods are precise control of composition, low processing temperature, and better homogeneity. Calcium nitrate tetrahydrate, phosphorous pentoxide and Tetrabuthylammon...
متن کاملSynthesis, characterization, of Fluorohydroxyapatite nanopowders by sol-gel processing
In this work, sol-gel processing was used to synthesize the fluorohydroxyapatite (nano-FHA, Ca10(PO4)6(OH)2−xFx) nanopowders. The advantages of the sol-gel method over other methods are precise control of composition, low processing temperature, and better homogeneity. Calcium nitrate tetrahydrate, phosphorous pentoxide and Tetrabuthylammon...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
journal of physical & theoretical chemistryISSN
دوره 5
شماره 3 2008
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023