a simulation of managed pressure drilling in iranian darquain oil field
نویسندگان
چکیده
the narrow operating window between pore pressure and fracture pressure makes drilling difficult in some operations. a feasibility study of managed pressure drilling (mpd) is carried out on iran darquain oil field. the previous wells drilled in this field showed that mud returns were lost during drilling gadvan formation. the present work addresses this problem by means of surface back pressure application in darquain oil field. the methodology employed in this study is based on hydraulic analysis calculations and comparative drilling operation pressures. the dzxion mpd software performs hydraulic analysis using the api rp 13d rheological model and calculates the annular pressure drop to compare the pressures and the required back pressure, if needed. using a mud weight of 14.31 ppg and exerting 100 psi static back pressure, the wellbore pressure profile got slightly overbalanced. when the mud pumps are in service, no back pressure is required. the problem is resolved and no kick or loss is observed using a mw of 14.31 ppg and a static back pressure of 100 psi. as a result, the managed pressure drilling technology is useful in iran darquian oil field through using a lower mud weight in order to overcome the circulation loss in sarvak formation. this study is based on hydraulic analysis calculations and comparing the drilling operation pressures in darquain oil field. for analyzing the pressure regimes throughout the well, dzxion managed pressure drilling software performs hydraulic analysis. this software calculates annular pressure drop and equivalent circulating density to compare the pressures and required back pressure, if needed. by using this method to drill the well, some advantages were gained: the mud weights used to drill the well, the number of casing strings, and the number of changing mud weights were reduced.
منابع مشابه
A SIMULATION OF MANAGED PRESSURE DRILLING IN IRANIAN DARQUAIN OIL FIELD
The narrow operating window between pore pressure and fracture pressure makes drilling difficult in some operations. A feasibility study of managed pressure drilling (MPD) is carried out on Iran Darquain oil field. The previous wells drilled in this field showed that mud returns were lost during drilling Gadvan formation. The present work addresses this problem by means of surface back pressure...
متن کاملManaged Pressure Drilling Using Integrated Process Control
Control of wellbore pressure during drilling operations has always been important in the oil industry as this can prevent the possibility of well blowout. The present research employs a combination of automatic process control and statistical process control for the first time for the identification, monitoring, and control of both random and special causes in drilling operations. To this end, ...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Nonlinear model predictive control of managed pressure drilling.
A new design of nonlinear model predictive controller (NMPC) is proposed for managed pressure drilling (MPD) system. The NMPC is based on output feedback control architecture and employs offset-free formulation proposed in [1]. NMPC uses active set method for computing control inputs. The controller implements an automatic switching from constant bottom hole pressure (CBHP) regulation to flow c...
متن کاملA Successful Experience in Optimization of a Production Well in a Southern Iranian Oil Field
متن کامل
Modeling and Control for Managed Pressure Drilling from Floaters
Managed pressure drilling is a sophisticated pressure control method which is intended to meet increasingly high demands in drilling operations in the oil and gas industry. With this method, the well is pressurized and the drilling mud is released through a control choke which can be used to actively control/reject pressure variations. Such a control system needs to handle several disturbances,...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
journal of petroleum science and technologyناشر: research institute of petroleum industry (ripi)
ISSN 2251-659X
دوره 3
شماره 2 2013
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023