effect of ageing heat treatment on corrosion behaviorof 17-4 ph stainless steel in 3.5% nacl
نویسندگان
چکیده
the 17-4ph alloy is a martensitic stainless steel with 3–5 wt% cu, strengthened by the precipitation hardening. due to excellent mechanical properties, corrosion resistance and ease of heat treatment, this alloy has unique applications in nuclear power plants and marine constructions. in this paper, the influence of ageing heat treatment, solution annealing followed by ageing at 480, 550 and 620 °c on the corrosion behavior of 17-4ph stainless steel in 3.5% nacl is reported. various dc electrochemical measurements and microscopical examination was used. the slow scan rate potentiodynamic polarization revealed that by increasing ageing temperature from 480 to 550 °c, the pitting potential is significantly increased, but further increasing the ageing temperature to 620 °c reduces the pitting potential. microscopical observation also confirmed the formation of several metastable and stable pits in the sample aged at 620 °c.
منابع مشابه
Effect of ageing heat treatment on corrosion behaviorof 17-4 PH stainless steel in 3.5% NaCl
The 17-4PH alloy is a martensitic stainless steel with 3–5 wt% Cu, strengthened by the precipitation hardening. Due to excellent mechanical properties, corrosion resistance and ease of heat treatment, this alloy has unique applications in nuclear power plants and marine constructions. In this paper, the influence of ageing heat treatment, solution annealing followed by ageing at 480, 550 and 62...
متن کاملEVALUATION OF PRECIPITATION HARDENING HEAT TREATMENT OF PH 17-7 STAINLESS STEEL SPRING
In this paper, the influence of heat treatment on PH17-7 stainless steel spring was evaluated. Precipitation hardening phenomenon of PH 17-7 steel was evaluated in three stages. First, the spring constant changes with time and temperature was evaluated. Second, the spring constant changes with respect to its original length at constant temperature and time with blocking (spring length aft...
متن کاملEffects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
Department of Mechanical Engineering, Mississippi State University, Box 9552, Mississippi State, MS 39762, United States Center for Advanced Vehicular Systems (CAVS), Mississippi State University, Box 5405, Mississippi State, MS 39762, United States Department of Industrial and Systems Engineering, Texas A&M University, College Station, TX 77843, United States Department of Industrial and Syste...
متن کاملEffect of heat treatment on stainless steel orthodontic wires.
This study evaluated the effect of heat treatment on CrNi stainless steel orthodontic archwires. Half of forty archwires of each thickness - 0.014" (0.35 mm), 0.016" (0.40 mm), 0.018" (0.45 mm) and 0.020" (0.50 mm) (totalling 160 archwires) - were subjected to heat treatment while the remainder were not. All of the archwires had their individual thickness measured in the anterior and posterior ...
متن کاملThe Inhibition Effect of Polyethylenimine (PEI) on Pitting Corrosion of 304 Austenitic Stainless Steel in 3.5% NaCl Solution
One of the problems in the case of stainless steels is their low corrosion resistance against pitting corrosion in chloride containing environments, thereby leading to severe damage to industries. In this research, the pitting corrosion of 304 austenitic stainless steel was studied in 3.5% NaCl solution at room temperature (25˚C) by performing electrochemical measurements (containing cyclic pol...
متن کاملTowards sustainable machining of 17-4 PH stainless steel using hybrid MQL-hot turning process
The use of a minimum quantity of lubrication (MQL) with extremely low consumption of lubricant in machining processes has been reported as a technologically and environmentally feasible alternative to conventional flood cooling. In hot machining, the external heat source is applied during machining that will assist to increase machining performance. Many external heating techniques are availabl...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of iron & steel society of iranناشر: iron & steel society of iran
ISSN 1735-4145
دوره 7
شماره 1 2010
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023