exergy analysis of counter flow wet cooling tower in khuzestan steel co

نویسندگان

navid bozorgan

چکیده

since the energy analysis considers the quantity of energy, it cannot show the performance of the cooling tower. therefore, in order to optimize the performance of the tower and also the process which the cooling tower is a part of it, it is necessary to analyze the energy and exergy of the tower simultaneously. in this paper, the energy and exergy of one of the cooling towers of khuzestan steel co. is analyzed in order to improve the function of this unit and its effect on the related units. moreover, the exergy of water and air which exchange heat with each other has also been studied. the mathematical model presented in this paper has been based on the principle of heat and mass transfer between water and air. the results of this study show that water makes more exergy than air because the system generates entropy. the results also show that the exergy of water decreases constantly from the upper part of the tower to its lower part, the exergy of air, however increases from bottom to top along the tower. when the temperature decreases water loses exergy but when the temperature is increased the air gains exergy.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

evaluation of the heat and mass transfer and exergy in the counter flow wet cooling tower of khuzestan steel company (ksc)

a thermodynamic analysis of the counter flow wet cooling tower (cwct) in the steelmaking unit of the khuzestan steel company (ksc) is performed in this paper. we evaluated both energy and exergy formulations for analyzing the heat and mass transfer, exergy and second-law efficiency in this cooling tower. the lewis factor le f is an indication of the relative rates of heat and mass transfer in a...

متن کامل

Dynamic Modeling of Mechanical Draft Counter-Flow Wet Cooling Tower with Modelica

Cooling towers are important equipments for the HVAC systems in commercial buildings, rejecting the process heat generation to the atmosphere. Dynamic modeling of cooling towers is beneficial for control design and fault detection and diagnostics of the chilled-water systems. This paper proposes a simple and yet effective dynamic model for a typical mechanical draft counter-flow wet cooling tow...

متن کامل

the effect of packing on temperature and pressure drop in mechanical counter flow cooling tower

cooling towers are widely used in most industrial units to reject waste heat to the atmosphere. this paper deals with an experimental analysis of heat and mass transfer phenomena between water and air by direct contact in a cooling tower. the tower is filled with 6 type packing. in this study temperature and pressure drop and tower characteristics was used in determining experimentally the ther...

متن کامل

energy and exergy analysis of a co-current gas cooling tower based on mathematical modeling and simulation results

beginning with a discussion of energy and exergy analysis definitions, the presented study provides a descriptive mathematical model for energy and exergy analysis for a co-current gas cooling tower. for this purpose using conservation laws of mass, energy and momentum, the variation of temperature and enthalpy of gas and liquid streams are predicted along the tower length and are used in order...

متن کامل

Performance Analyses of Counter-Flow Closed Wet Cooling Towers Based on a Simplified Calculation Method

As one of the most widely used units in water cooling systems, the closed wet cooling towers (CWCTs) have two typical counter-flow constructions, in which the spray water flows from the top to the bottom, and the moist air and cooling water flow in the opposite direction vertically (parallel) or horizontally (cross), respectively. This study aims to present a simplified calculation method for c...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of mechanical research and application

ISSN 2251-7383

دوره 2

شماره 1 2010

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023