rapid manufacturing of co-cr-mo implants by three-dimentional printing process for orthopedic applications
نویسندگان
چکیده
the fabrication of complex-shaped parts out of (wt %) co-28cr-6mo alloy by three-dimensional printing (3dp) was studied using two grades of the alloy with average particle sizes of 20 and 75 μm. to produce sound specimens, 3dp processing parameters were tuned. the sintering behavior of the powders was characterized by the dilatometric analysis. batch sintering in argon atmosphere at 1280 °c for 2h was also performed. it was shown that complex-shaped biomedical parts with total porosity of 12-25% and homogenous pore structure can be fabricated by the 3dp process.
منابع مشابه
Rapid Manufacturing of Co-Cr-Mo Implants by Three-Dimentional Printing Process for Orthopedic Applications
The fabrication of complex-shaped parts out of (wt %) Co-28Cr-6Mo alloy by three-dimensional printing (3DP) was studied using two grades of the alloy with average particle sizes of 20 and 75 μm. To produce sound specimens, 3DP processing parameters were tuned. The sintering behavior of the powders was characterized by the dilatometric analysis. Batch sintering in argon atmosphere at 1280 °...
متن کاملCORROSION RESISTANCE OF Co-Cr-Mo ALLOY USED IN DENTISTRY ODPORNOŚĆ KOROZYJNA STOPU Co-Cr-Mo WYKORZYSTYWANEGO W STOMATOLOGII
The presented paper studies the effect of the casting technology on the corrosion resistance of Co-Cr-Mo alloy. The investigations were conducted on a commercial alloy with the brand name ARGELOY N.P SPECIAL (Co-Cr-Mo) produced by Argen as well as the same alloy melted and cast by the lost wax casting method performed by a dental technician. The corrosion behavior of the dental alloys in an art...
متن کاملThree-Dimensional Printing in Orthopedic Surgery.
Three-dimensional (3D) printing is emerging as a clinically promising technology for rapid prototyping of surgically implantable products. With this commercially available technology, computed tomography or magnetic resonance images can be used to create graspable objects from 3D reconstructed images. Models can enhance patients' understanding of their pathology and surgeon preoperative plannin...
متن کاملElectron Beam Melted (EBM) Co-Cr-Mo Alloy for Orthopaedic Implant Applications
The Electron Beam Melting (EBM) manufacturing process is emerging as an additional method for producing orthopaedic devices in several materials, including Co-Cr-Mo Alloy. This work presents the chemical, microstructural and mechanical properties of several test specimens produced by the EBM process before and after a post‐EBM Heat treatment. Comparisons are made to the properties of Co-Cr-Mo m...
متن کاملLattice Structures and Functionally Graded Materials Applications in Additive Manufacturing of Orthopedic Implants: A Review
A major advantage of additive manufacturing (AM) technologies is the ability to print customized products, which makes these technologies well suited for the orthopedic implants industry. Another advantage is the design freedom provided by AM technologies to enhance the performance of orthopedic implants. This paper presents a state-of-the-art overview of the use of AM technologies to produce o...
متن کاملFabrication of Drug Eluting Ti Implants for Dental/orthopedic Applications
Titanium and its alloys are typically used for fabrication of dental and orthopedic implants as they posses various desirable properties including biocompatibility and corrosion resistance. In spite of such benefits, titanium implants show lack of osseointegration after surgery in minor cases. The objective of this research has been to modify the surface of titanium alloy for medical applicatio...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
iranian journal of pharmaceutical sciencesجلد ۴، شماره ۱، صفحات ۳۱-۳۶
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023