load-deflection and surface properties of coated and conventional superelastic orthodontic archwires in conventional and metal-insert ceramic brackets
نویسندگان
چکیده
background: properties of coated archwires, which have been introduced for esthetic demands during orthodontic treatments, along with the use of tooth-colored brackets, are not clear. the aim of this study is to compare the load-deflection and surface properties of coated superelastic archwires with conventional superelastic archwires in conventional and metal-insert ceramic brackets. materials and methods: in this experimental study, 3 types of archwires including ultraesthetic polycoated, ultraesthetic epoxyresin coated and conventional (uncoated) superelastic nickel-titanium (niti) archwires were used in each of 2 types of brackets including conventional and metal-insert ceramic. to simulate oral environment, all specimens were incubated in artificial saliva using thermocycling model and then were tested in three-bracket bending test machine. loading and unloading forces, plateau gap and end load deflection point (eldp) were recorded. archwires were investigated with a stereomicroscope before and after the experiment. two-way anova and tukey tests were used at p< 0.05. results: epoxyresin archwires produced lower forces (19 to 310 gr) compared to polycoated (61 to 359 gr) and niti (61 to 415 gr) ( p< 0.0001). the maximum eldp (0.43 mm) was observed in epoxyresin archwires ( p< 0.001). coatings of some epoxyresin wires were torn and of polycoated wires peeled off. conventional ceramic bracket produced higher loading forces with polycoated and niti archwires and lower unloading forces with all 3 types of archwires compared to metalinsert type ( p< 0.05). conclusion: epoxyresin-coated archwire had the lowest force and highest eldp. coatings were not durable in these experimental conditions. conventional ceramic bracket produced higher frictional force compared to metal-insert type. key words: ceramic bracket, esthetic, mechanical phenomena, orthodontic archwire
منابع مشابه
Evaluation of friction of conventional and metal-insert ceramic brackets in various bracket-archwire combinations.
The purpose of the study was to measure and compare the level of frictional resistance generated between conventional ceramic brackets (Transcend Series 6000, 3M Unitek, Monrovia, Calif), ceramic brackets with stainless steel slot (Clarity, 3M Unitek), conventional stainless steel brackets (Victory Series, 3M Unitek), and 3 different orthodontic wire alloys: stainless steel (stainless steel, SD...
متن کاملStatic and kinetic frictional forces of silica-insert ceramic brackets with coated archwires in artificial saliva
Background During sliding mechanics, the frictional force (FF) is an important counterforce to orthodontic tooth movement. The purpose of this in vitro study was to investigate the static and kinetic FFs of S silica-insert ceramic (SIC) brackets with Teflon-coated (TC) and conventional S stainless steel (SS) archwires. Materials and Methods The target group of this study included 80 maxillary...
متن کاملComparison of frictional resistance between self-ligating and conventional brackets tied with elastomeric and metal ligature in orthodontic archwires
OBJECTIVE To compare the frictional resistance between self-ligating and conventional brackets tied to different types of wire. MATERIAL AND METHODS Abzil Kirium Capelozza (Pattern I) and Easy Clip (Roth prescription) incisor brackets were used. An elastomeric ligature or a 0.10-in ligating wire was used to ligate the wire to the Abzil bracket. Three types of orthodontic archwire alloys were ...
متن کاملForce-deflection properties of initial orthodontic archwires.
AIM This in vitro study measured the force-deflection behavior of selected initial alignment archwires by conducting three-point bending tests under controlled conditions. The study tested four wire designs: multistranded stainless steel, conventional stainless steel, superelastic nickel-titanium, and thermoactivated nickel-titanium archwires. METHOD The wires (n = 15) were ligated into stain...
متن کاملcomparison between conventional and alternative technique in extraction of maxillary molars
چکیده ندارد.
15 صفحه اولThe effect of fluoride exposure on the load-deflection properties of superelastic nickel-titanium-based orthodontic archwires.
BACKGROUND It has been demonstrated that fluoride prophylactic agents may cause hydrogen absorption in NiTi wires and degrade their mechanical properties. AIMS To investigate the effect of a fluoride mouthwash on load-deflection characteristics of three types of nickel-titanium-based orthodontic archwires. METHODS Twenty maxillary 0.016 inch round specimens from each of the single-strand Ni...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
dental research journalجلد ۹، شماره ۲، صفحات ۰-۰
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023