fluoride release and bioactivity evaluation of glass ionomer: forsterite nanocomposite

نویسندگان

fatemeh sadat sayyedan

mohammadhossein fathi

hossein edris

ali doostmohammadi

چکیده

background: the most important limitation of glass ionomer cements (gics) is the weak mechanical properties. our previous research showed that higher mechanical properties could be achieved by addition of forsterite (mg2sio4) nanoparticles to ceramic part of gic. the objective of the present study was to fabricate a glass ionomer- mg2sio4 nanocomposite and to evaluate the effect of addition of mg2sio4 nanoparticles on bioactivity and fluoride release behavior of prepared nanocomposite. materials and methods: forsterite nanoparticles were made by sol-gel process. x-ray diffraction (xrd) technique was used in order to phase structure characterization and determination of grain size of mg2sio4 nanopowder. nanocomposite was fabricated via adding 3wt.% of mg2sio4 nanoparticles to ceramic part of commercial gic (fuji ii gc). fluoride ion release and bioactivity of nanocomposite were measured using the artificial saliva and simulated body fluid (sbf), respectively. bioactivity of specimens was investigated by fourier transitioned-infrared spectroscopy (ftir), scanning electronmicroscopy (sem), inductively coupled plasma optical emission spectroscopy (icp-oes) and registration of the changes in ph of soaking solution at the soaking period. statistical analysis was carried out by one way analysis of variance and differences were considered significant if p < 0.05. results: the results of xrd analysis confirmed that nanocrystalline and pure mg2sio4 powder was obtained. fluoride ion release evaluation showed that the values of released fluoride ions from nanocomposite are somewhat less than fuji ii gc. sem images, ph changes of the sbf and results of the icp-oes and ftir tests confirmed the bioactivity of the nanocomposite. statistical analysis showed that the differences between the results of all groups were significant (p < 0.05). conclusion: glass ionomer- mg2sio4 nanocomposite could be a good candidate for dentistry and orthopedic applications, through of desirable fluoride ion release and bioactivity. key words: bioactivity, fluoride release, forsterite nanoparticles, glass ionomer cement, sol-gel

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

evaluation of bioactivity and the ability to release fluoride in glass-ionomer cement/silk fiber composite

introduction: glass-ionomer cements (gics) are one of the most important dental restorative biomaterials. the aim of this study was to synthesize glass-ionomer‒silk fiber composite and evaluate the effect of adding natural degummed silk fiber on the bioactivity and the ability to release fluoride by glass-ionomer cement. materials and methods: in this study, commercial fuji ii glass-ionomer cem...

متن کامل

Fluoride Release by Glass Ionomer Cements, Compomer and Giomer

BACKGROUND To measure the amounts of fluoride released from fluoride-containing materials, four glass ionomer cements (Fuji IX, Fuji VII, Fuji IX Extra and Fuji II LC), a compomer (Dyract Extra) and a giomer (Beautifil) were used in this study. METHODS Twenty cylindrical specimens were prepared from each material. The amount of released fluoride was measured during the first week and on the d...

متن کامل

Do conventional glass ionomer cements release more fluoride than resin-modified glass ionomer cements?

OBJECTIVES The aim of this study was to evaluate the fluoride release of conventional glass ionomer cements (GICs) and resin-modified GICs. MATERIALS AND METHODS The cements were grouped as follows: G1 (Vidrion R, SS White), G2 (Vitro Fil, DFL), G3 (Vitro Molar, DFL), G4 (Bioglass R, Biodinâmica), and G5 (Ketac Fil, 3M ESPE), as conventional GICs, and G6 (Vitremer, 3M ESPE), G7 (Vitro Fil LC,...

متن کامل

fluoride release by glass ionomer cements, compomer and giomer

normal 0 false false false en-us x-none ar-sa microsoftinternetexplorer4 background: to measure the amounts of fluoride released from fluoride-containing materials, four glass ionomer cements (fuji ix, fuji vii, fuji ix extra and fuji ii lc), a compomer (dyract extra) and a giomer (beautifil) were used in this study . methods: twenty cylindrical specimens were prepared from each material. the a...

متن کامل

Comparison of the Amount of Fluoride Release from Nanofilled Resin Modified Glass Ionomer, Conventional and Resin Modified Glass Ionomer Cements

OBJECTIVE To investigate and compare the amount of fluoride release of conventional, resin modified and nanofilled resin modified glass ionomer cements. MATERIALS AND METHODS Tablets of glass-ionomer cements were immersed in deionized water and incubated at 37°C. After 1, 2, 7, 15 and 30 days, fluoride ion was measured under normal atmospheric conditions by fluoride ion selective electrode. B...

متن کامل

comparison of the amount of fluoride release from nanofilled resin modified glass ionomer, conventional and resin modified glass ionomer cements.

to investigate and compare the amount of fluoride release of conventional, resin modified and nanofilled resin modified glass ionomer cements.tablets of glass-ionomer cements were immersed in deionized water and incubated at 37°c. after 1, 2, 7, 15 and 30 days, fluoride ion was measured under normal atmospheric conditions by fluoride ion selective electrode. buffer (tisab ii) was used to decomp...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
dental research journal

جلد ۱۰، شماره ۴، صفحات ۰-۰

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023