influence of different luting protocols on shear bond strength of computer aided design/computer aided manufacturing resin nanoceramic material to dentin
نویسندگان
چکیده
background: the purpose of this study was to evaluate the influence of three different luting protocols on shear bond strength of computer aided design/computer aided manufacturing (cad/cam) resin nanoceramic (rnc) material to dentin. materials and methods: in this in vitro study, 30 disks were milled from rnc blocks (lava ultimate/3m espe) with cad/cam technology. the disks were subsequently cemented to the exposed dentin of 30 recently extracted bovine permanent mandibular incisors. the specimens were randomly assigned into 3 groups of 10 teeth each. in group 1, disks were cemented using a total‑etch protocol (scotchbond™ universal etchant phosphoric acid + scotchbond universal adhesive + relyx™ ultimate conventional resin cement); in group 2, disks were cemented using a self‑etch protocol (scotchbond universal adhesive + relyx™ ultimate conventional resin cement); in group 3, disks were cemented using a self‑adhesive protocol (relyx™ unicem 2 automix self‑adhesive resin cement). all cemented specimens were placed in a universal testing machine (instron universal testing machine 3343) and submitted to a shear bond strength test to check the strength of adhesion between the two substrates, dentin, and rnc disks. specimens were stressed at a crosshead speed of 1 mm/min. data were analyzed with analysis of variance and post‑hoc tukey’s test at a level of significance of 0.05. results: post‑hoc tukey testing showed that the highest shear strength values (p < 0.001) were reported in group 2. the lowest data (p < 0.001) were recorded in group 3. conclusion: within the limitations of this in vitro study, conventional resin cements (coupled with etch and rinse or self‑etch adhesives) showed better shear strength values compared to self‑adhesive resin cements. furthermore, conventional resin cements used together with a self‑etch adhesive reported the highest values of adhesion. key words: adhesive cements, computer aided design/computer aided manufacturing ceramic, shear bond strength
منابع مشابه
effect of different adhesive strategies on microtensile bond strength of computer aided design/computer aided manufacturing blocks bonded to dentin
background: the aim of this study was to determine the microtensile bond strength (μtbs) of ceramic and composite computer aided design‑computer aided manufacturing (cad‑cam) blocks bonded to dentin using different adhesive strategies. materials and methods: in this in vitro study, 30 crowns of sound freshly extracted human molars were sectioned horizontally 3 mm above the cementoenamel junctio...
متن کاملMicro-Shear Bond Strength of Indirect Composite Resin to Three Different Computer-Milled Cores After Thermocycling
Background and Aim: The aim of this study was to evaluate the micro-shear bond strength of an indirect composite resin to three different types of cores. Materials and Methods: In this in-vitro study, 14 blocks (5×5×2 mm) were designed and milled by computer from cobalt-chromium (Co-Cr) alloy, zirconia, and polyether ether ketone (PEEK). Each sample was treated according to the manufacturer’s ...
متن کاملImmediate and delayed micro-tensile bond strength of different luting resin cements to different regional dentin
We sought to evaluate immediate and delayed micro-tensile bond strength of Panavia F2.0 and Multilink Sprint resin cement to superficial, deep and cervical dentin. Thirty-six freshly extracted non-carious human molars were sectioned in the mesiodistal direction to expose three different dentin regions including superficial dentin (1 mm below the dentine-enamel junction), deep dentin (1 mm above...
متن کاملAn Overview of Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) in Restorative Dentistry
Objective: To review the current knowledge of CAD/CAM in dentistry and its development in the mentioned field. Sources: An electronic search was conducted across Ovid Medline, complemented by manual search across individual databases, such as Cochrane, Medline and ISI Web of Science databases and Google Scholar for literature analysis on the mentioned topic. The studies were reviewed thoroughly...
متن کاملEfficacy of various cleansing techniques on dentin wettability and its influence on shear bond strength of a resin luting agent
PURPOSE To evaluate the shear bond strength of resin luting agent to dentin surfaces cleansed with different agents like pumice, ultrasonic scaler with chlorhexidine gluconate, EDTA and the influence of these cleansing methods on wetting properties of the dentin by Axisymmetric drop Shape Analysis - Contact Diameter technique (ADSA-CD). MATERIALS AND METHODS Forty coronal portions of human th...
متن کاملClassifications and Properties of Materials for Chairside Computer-Aided Design/Computer-Aided Manufacturing Dentistry: A Review
Background and Aim: Chairside computer-aided design/computer-aided manufacturing (CAD/CAM) systems have become considerably more accurate, reliable, efficient, fast, and prevalent since 1985 when CEREC was introduced. The inceptive restorative material option for chairside CAD/CAM restorations was limited to ceramic blocks. Today, restorative material options have been multiplied and include me...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
dental research journalجلد ۱۳، شماره ۲، صفحات ۰-۰
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023