dissolution enhancement of glibenclamide by solid dispersion: solvent evaporation versus a supercritical fluid-based solvent -antisolvent technique

glibenclamide (glib) is a poorly soluble drug with formulation-dependent bioavailability. therefore, we attempted in this study to improve glib dissolution rate by preparing drug solid dispersions by solvent evaporation (se) and supercritical fluid solvent-antisolvent techniques (scf-sas). a d-optimal mixture design was used to investigate the effects of different ratios of hpmc e5 (50-100%), peg 6000 (0-40%), and poloxamer 407 (0-20%) on drug dissolution from different solid dispersion (sd) formulations prepared by se. the ratios of carriers used in scf-sas method were hpmc e5 (fixed at 60%), peg 6000 (20-40%), and poloxamer 407 (0-20%). a constant drug : carrier weight ratio of 1 :10 was used in all experiments. the sds obtained were physically characterized and subjected to the dissolution study. the major glib bands in ftir spectra were indicative of drug integrity. the reduced intensity and the fewer number of peaks observed in x-ray diffractograms (xrd) of glib formulations was the indicative of at least partial transformation of crystalline to amorphous glib. this change and/or dilution of drug in much higher amounts of carriers present caused disappearance of distinctive endothermic peaks in differential scanning calorimetry thermograms of glib formulations. the model generated according to the results of the d-optimal mixture design indicated that glib formulations comprising hpmc (50%-60%), peg (34-40%), and poloxamer (6-10%) had enhanced dissolution performances. as compared to se method, the scf-sas technique produced formulations of higher dissolution performances, likely due to the effects of solution and the supercritical co 2 (sc-co2) on enhanced plasticization of polymers and thus increased diffusion of the drug into the polymer matrix.