microscopic evaluation of cleaning efficiency of three different nickel-titanium rotary instruments

نویسندگان

maryam bidar department of endodontics, dental research center of mashad university of medical sciences, mashad, iran.

saeed moradi department of endodontics, dental research center of mashad university of medical sciences, mashad, iran.

maryam forghani endodontis, mashad, iran.

salma bidad postgraduate student, mashad university of medical sciences, mashad, iran.

چکیده

introduction: this study compared the cleaning efficiency of mtwo, race and medin nickel-titanium (niti) rotary instruments. materials and methods: sixty mandibular molar mesial roots were selected with angle curvatures between 25-35 degrees and divided into three groups; each containing 20 teeth. canals were prepared with the rotary files and irrigated with 2.5% naocl solution after each instrument. total of 5ml of normal saline was used as the final rinse; subsequently the canals were dried with paper points. the amount of debris and smear layer in three parts of the root canal walls was evaluated using sem and the data were analyzed by using the kruskal-wallis test and the mann-whitney u test. results: the results for remnant debris in the coronal part of root canals were similar, whereas in the middle third, mtwo instruments achieved significantly better results compared to race and medin instruments. in the apical third of the root canals more debris was created by race instruments. conclusion: overall, mtwo instruments had greater success in producing clean canals.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Microscopic Evaluation of Cleaning Efficiency of Three Different Nickel-Titanium Rotary Instruments

INTRODUCTION This study compared the cleaning efficiency of Mtwo, Race and Medin Nickel-Titanium (NiTi) rotary instruments. MATERIALS AND METHODS Sixty mandibular molar mesial roots were selected with angle curvatures between 25-35 degrees and divided into three groups; each containing 20 teeth. Canals were prepared with the rotary files and irrigated with 2.5% NaOCl solution after each instr...

متن کامل

A cleaning protocol for rotary nickel-titanium endodontic instruments.

BACKGROUND The cleaning of endodontic and all dental instruments prior to sterilization is a prerequisite for their processing for re-use. This study aimed to develop a clinically practical cleaning protocol for rotary nickel-titanium (NiTi) endodontic files prior to sterilization. METHODS Cleaning experiments were conducted on six different types of files that had been used on human teeth. T...

متن کامل

Metallurgical characterization of controlled memory wire nickel-titanium rotary instruments.

INTRODUCTION To improve the fracture resistance of nickel-titanium (NiTi) files, manufacturers have introduced new alloys and developed new manufacturing processes for the fabrication of NiTi files. This study aimed to examine the phase transformation behavior and microstructure of NiTi instruments from a novel controlled memory NiTi wire (CM wire). METHODS Instruments of EndoSequence (ES), P...

متن کامل

Factors influencing the fracture of nickel-titanium rotary instruments.

AIM To evaluate the effect of rotational speed and the angle and radius of curvature of root canals on the fracture of two types of nickel-titanium rotary instruments: K3 and ProTaper. METHODOLOGY A total of 240 root canals of extracted human maxillary and mandibular molars were divided into two groups of 120, according to the angle of the canal curvature (group A: <30 degrees, group B: >30 d...

متن کامل

Mechanical and Metallurgical Properties of Various Nickel-Titanium Rotary Instruments

The aim of this study was to investigate the effect of thermomechanical treatment on mechanical and metallurgical properties of nickel-titanium (NiTi) rotary instruments. Eight kinds of NiTi rotary instruments with sizes of ISO #25 were selected: ProFile, K3, and One Shape for the conventional alloy; ProTaper NEXT, Reciproc, and WaveOne for the M-wire alloy; HyFlex CM for the controlled memory-...

متن کامل

Fatigue testing of controlled memory wire nickel-titanium rotary instruments.

INTRODUCTION To improve the fracture resistance of nickel-titanium (NiTi) files, manufacturers have introduced new alloys to manufacture NiTi files and developed new manufacturing processes. This study was aimed to examine the fatigue behavior of NiTi instruments from a novel controlled memory NiTi wire (CM Wire). METHODS Instruments of ProFile, Typhoon (TYP), Typhoon CM (TYP CM), DS-SS025042...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
iranian endodontic journal

جلد ۵، شماره ۴، صفحات ۱۷۴-۱۷۸

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023