study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method
نویسندگان
چکیده
soil is a nonrenewable source that needs considerable management to prevent physical deteriorationby erosion and compaction. compacted soil causes low fertility and yield. the purpose of this study isto investigate the effect of viscoelastic properties of soil and to determine important factors oncompaction. furthermore, stress distribution, prediction of soil compaction and simulation of its effectunder tractor wheels using ansys software were also studied. predicted results using ansyssoftware are compared with laboratory and field results. simulations were carried out by changing andmeasuring effective factors on soil compaction. these factors consist of wheel parameters whichinclude: number of wheel passes, speed and load; and the soil parameters such as soil bulk density andyoung’s modulus. the predicted results indicated that maximum soil compaction in the first trafficwith 512 mm was induced by viscoelastic properties of soil and the minimum soil compaction in thesixth traffic was 8 mm caused by soil elasticity properties. variation in soil bulk density wasnegligible. also at each wheel pass, e maximum stress was in the soil surface and this decreased withincrease in depth. the maximum vertical stress on the soil in the sixth traffic was 120.477 kpa at 2.52km/h and the minimum was 117.46 kpa at 5 km/h.
منابع مشابه
Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method
Soil is a nonrenewable source that needs considerable management to prevent physical deteriorationby erosion and compaction. Compacted soil causes low fertility and yield. The purpose of this study isto investigate the effect of viscoelastic properties of soil and to determine important factors oncompaction. Furthermore, stress distribution, prediction of soil compaction and simulation of its e...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
investigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem
در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...
on the relationship between using discourse markers and the quality of expository and argumentative academic writing of iranian english majors
the aim of the present study was to investigate the frequency and the type of discourse markers used in the argumentative and expository writings of iranian efl learners and the differences between these text features in the two essay genres. the study also aimed at examining the influence of the use of discourse markers on the participants’ writing quality. to this end the discourse markers us...
15 صفحه اولstudy of cohesive devices in the textbook of english for the students of apsychology by rastegarpour
this study investigates the cohesive devices used in the textbook of english for the students of psychology. the research questions and hypotheses in the present study are based on what frequency and distribution of grammatical and lexical cohesive devices are. then, to answer the questions all grammatical and lexical cohesive devices in reading comprehension passages from 6 units of 21units th...
Simulation of effective parameters on low-carbon steel laser welding process using finite element method
In this paper, laser beam welding of a rectangular piece of steel was simulated using Fluent software. Physical properties of analytical field was constant and its changes with temperature was ignored. In the present work, effect of tool speed and laser power on temperature distribution of workpiece surface and different deeps in the plane of symmetry and also maximum of temperature and depth o...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
journal of computational applied mechanicsجلد ۴۶، شماره ۲، صفحات ۱۰۷-۱۱۵
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023