influence of varying timing angle on performance of an si engine: an experimental and numerical study
نویسندگان
چکیده
engine performance depends on two main factors of engine speed and ignition time. ignition timing can affect engine life, fuel economy and engine power. in this paper, to study engine performance of peugeot 206 tu3a with comparison ratio of 10.5:1 and displacement of 1361cc in matlab software, a two-zone burned/unburned model with the fuel burning rate described by awiebe function was used for modeling in-cylinder combustion. for studying this issue, thermodynamic models such as woshni, isentropic, etc. were used. then, the experiments were carried out to validate the calculated data. the objective of the present work was to examine effect of ignition timing on the performance of an si engine. for achieving this goal, at the speed of 3400 rpm, ignition timing was changed in the range of 41 degrees before the top dead centre to 10 degrees after tdc. by changing the ignition timing, the results of some characteristics such as power, torque, indicatory pressure, exhaust emission and efficiency were obtained and compared. the results demonstrated that optimal power and torque and the maximum efficiency were achieved at 31 degrees before the top dead centre and engine performance was improved by changing timing angle. it was also indicated that the maximum thermal efficiency could be accomplished while peak pressure occurred between 5 and 15 degrees of atdc. the amounts of o2, co2 and co were almost constant but hc increased with increase of ignition timing.
منابع مشابه
Influence of varying timing angle on performance of an SI engine: An experimental and numerical study
Engine performance depends on two main factors of engine speed and ignition time. Ignition timing can affect engine life, fuel economy and engine power. In this paper, to study engine performance of Peugeot 206 TU3A with comparison ratio of 10.5:1 and displacement of 1361CC in MATLAB software, a two-zone burned/unburned model with the fuel burning rate described by aWiebe function was used for ...
متن کاملDerivation of Specific Heat Rejection Correlation in an SI Engine; Experimental and Numerical Study
The thermal balance analysis is a useful method to determine energy distribution and efficiency of internal combustion (IC) engines. In engines cooling concepts, estimation of heat transfer to brake power ratio, as one of the most significant performance characteristics, is highly demanded. In this paper, investigation of energy balance and derivation of specific heat rejection is carried out e...
متن کاملan investigation of the impact of self monitoring on langauge teachers motivational practice and its effect on learners motivation
the central purpose of this study was to conduct a case study about the role of self monitoring in teacher’s use of motivational strategies. furthermore it focused on how these strategies affected students’ motivational behavior. although many studies have been done to investigate teachers’ motivational strategies use (cheng & d?rnyei, 2007; d?rnyei & csizer, 1998; green, 2001, guilloteaux & d?...
experimental and numerical study of an on-engine turbocharger performance under the inlet pulsating flow
the present work is focused on the performance analysis of a 1.7 liter engine with turbocharger. the ultimate target is studying the response of the turbocharger to the inlet pulsating flow. such numerical analysis requires the time variation of pressure and velocity at turbine inlet. in order to achieve such information, one dimensional unsteady viscous compressible flow within a 1.7 liter tur...
متن کاملan investigation about the relationship between insurance lines and economic growth; the case study of iran
مطالعات قبلی بازار بیمه را به صورت کلی در نظر می گرفتند اما در این مطالعه صنعت بیمه به عنوان متغیر مستفل به بیمه های زندگی و غیر زندگی شکسته شده و هم چنین بیمه های زندگی به رشته های مختلف بیمه ای که در بازار بیمه ایران سهم قابل توجهی دارند تقسیم میشود. با استفاده از روشهای اقتصاد سنجی داده های برای دوره های 48-89 از مراکز ملی داده جمع آوری شد سپس با تخمین مدل خود بازگشتی برداری همراه با تعدادی ...
15 صفحه اولdevelopment and implementation of an optimized control strategy for induction machine in an electric vehicle
in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...
15 صفحه اولمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
journal of computational & applied research in mechanical engineering (jcarme)ناشر: shahid rajaee teacher training university (srttu)
ISSN 2228-7922
دوره 2
شماره 2 2013
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023