investigation of mechanical and magnetic properties of cu/ni/fe3o4 multi-layer composite produced by accumulative roll bonding (arb)

نویسندگان

امیر حسین اسلامی

سید مجتبی زبرجد

محمد محسن مشکساز

چکیده

techniques of severe plastic deformation have been successfully used for the production of novel metallic microstructures. among different types of these techniques, accumulative roll bonding (arb) has been extensively used to produce multi-layered composites. in the present study, a new manufacturing process for cu/ni- 1vol% fe3o4 composites was developed by using copper and nickel sheets together with micron sized fe3o4 particles as the starting materials. it was observed that as the number of arb passes increased, the nickel layers were necked and fractured. after five arb passes, a multi-layer cu/ni-fe3o4 composite including homogeneously distributed fragmented nickel layers with the fe3o4 particles in the copper matrix was achieved. the structure as well as the mechanical properties of this composite were studied at different stages of arb process. with an increase in the applied strain during arb passes, the strength of composite samples increased, but the elongation decreased. in addition, the magnetic behavior by magnetic device detector (vsm) and tensile tests were performed in order to investigate the mechanical behavior of arb products. finally, the scanning electron microscope (sem) was used to study the microstructure of layers in composites samples.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

INVESTIGATION OF TRIBOLOGICAL CHARACTERISTICS OF AL/NANO SiO2NANOCOMPOSITES PRODUCED BY ACCUMULATIVE ROLL BONDING (ARB) PROCESS

Accumulative roll-bonding process (ARB) is an important severe plastic deformation technique for production of the ultrafine grained, nanostructured and nanocomposite materials in the form of plates and sheets. In the present work, this process used for manufacturing Al/SiO 2 nanocomposites by using Aluminum 1050 alloy sheets and nano sized SiO 2 particles, at ambient temperature. After 8 cycle...

متن کامل

Investigation of Mechanical Properties for Commercial Purity Titanium Severely Plastic Deformed by Accumulative Roll-bonding Process

In this study accumulative roll bonding (ARB) process up to 8 Cycles (equivalent strain of 6.4) at ambient temperature was used in order to improve the mechanical properties of Commercial purity titanium (CP-Ti).Several experiment has been done and Mechanical properties of specimen has been discussed. For investigating optical microscope punching and hardness test were utilized. This is the fir...

متن کامل

Investigation of Mechanical Properties for Commercial Purity Titanium Severely Plastic Deformed by Accumulative Roll-bonding Process

In this study accumulative roll bonding (ARB) process up to 8 Cycles (equivalent strain of 6.4) at ambient temperature was used in order to improve the mechanical properties of Commercial purity titanium (CP-Ti).Several experiment has been done and Mechanical properties of specimen has been discussed. For investigating optical microscope punching and hardness test were utilized. This is the fir...

متن کامل

A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB)

In this study, the Al/Al2O3-SiC hybrid composite was produced by accumulative roll bonding (ARB). In the first and the second cycles, the particles were uniformly poured between the Al strips during each ARB cycle. In the subsequent cycles, ARB was repeated up to six cycles without adding the particles between the layers. After the total eight cycles, the particles were distributed uniformly wi...

متن کامل

Computational evaluation of the homogeneity of composites processed by accumulative roll bonding (ARB)

A new computational method based on MATLAB was used to study the effect of different parameters on the homogeneity of composites produced by a severe plastic deformation technique known as accumulative roll bonding. For a higher number of passes, the degree of particle agglomeration and clustering decreased, and an appreciable homogeneity was obtained in both longitudinal and transverse directi...

متن کامل

Ultra-fine Grained Bulk Steel Produced by Accumulative Roll-bonding (arb) Process

Much attention has been directed recently to ultra-grain refining of metallic materials, where the grain size is reduced to less than 1 mm. It is expected that submicrometer grained structure would result in high strength and toughness at ambient temperature [1] as well as high strain rate or low temperature superplasticity at elevated temperatures [2,3]. It has been reported recently that ultr...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
مهندسی متالورژی و مواد

جلد ۲۵، شماره ۲، صفحات ۰-۰

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023