effective parameters in synthesis and properties of monolithic oxynitride glasses prepared by sol-gel method

نویسندگان

سارا احمدی

بیژن افتخاری یکتا

حسین سرپولکی

علیرضا آقایی

چکیده

the monolithic oxynitride glasses in sio2-al2o3-b2o3 system were synthesized using sol-gel method. the porous, dried gels were heated in flowing ammonia for different times and varying temperatures. the nitrogen content of the oxynitride glasses was determined using an oxygen-nitrogen analyzer. the chemical bonding state and properties of glasses were investigated by means of fourier transform infrared spectroscopy, dilatometry, and vickers hardness methods. the crystallization behavior of glasses was studied with x-ray diffraction. spectroscopic evidence indicated that nitrogen was chemically dissolved in the glass network. the results showed that the chemical composition of the glass has an effect on the nitridation processes. the nitrogen content of the glasses was increased to 3.8% wt. by increasing the soaking time of nitridation from 2 to 15h. the dilatometric softening point temperature of the glasses was increased approximately 25°c, the micro-hardness value reached 10.89 gpa and thermal expansion coefficient was decreased from 3.88×10-6 to 3.39×10-6 after the nitridation process at optimal composition. the x-ray diffraction pattern of the glasses confirmed that nitrogen does not enter the crystalline phase.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synthesis and characterization of Alumina (Al2O3) nanoparticles prepared by simple sol-gel method

Alumina is one of the most widely used ceramic materials as catalysts, catalyst supports and absorbents, and also wear resistant coating. This study focused on fabricating and characterizing of alumina ceramic nanoparticles fabricated using new and simple sol-gel method. Aluminium oxide (Al2O3) nanoparticles were synthesized by iron (III) nitrate 9-hydrate as precursor. Physicochemical properti...

متن کامل

Synthesis and Structural Properties of Bismuth Doped Cobalt Nano Ferrites Prepared by Sol-Gel Combustion Method

A series of Bismuth doped Cobalt nanoferrites of chemical composition CoBixFe2-xO4 (where x = 0.00, 0.05, 0.10, 0.15, 0.20 & 0.25) were prepared by sol-gel combustion method and calcinated at 600 ̊C. The structural and morphological studies were carried out by using X-ray diffraction (XRD), Scanning Electron Microscope (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive Spectroscopy...

متن کامل

Synthesis and adsorption properties of chitosan-silica nanocomposite prepared by sol-gel method

A hybrid nanocomposite material has been obtained by in situ formation of an inorganic network in the presence of a preformed organic polymer. Chitosan biopolymer and tetraethoxysilane (TEOS), which is the most common silica precursor, were used for the sol-gel reaction. The obtained composite chitosan-silica material has been characterized by physicochemical methods such as differential therma...

متن کامل

Synthesis and characterization of Alumina (Al2O3) nanoparticles prepared by simple sol-gel method

Alumina is one of the most widely used ceramic materials as catalysts, catalyst supports and absorbents, and also wear resistant coating. This study focused on fabricating and characterizing of alumina ceramic nanoparticles fabricated using new and simple sol-gel method. Aluminium oxide (Al2O3) nanoparticles were synthesized by iron (III) nitrate 9-hydrate as precursor. Physicochemical properti...

متن کامل

Synthesis and properties evaluation of TiB2 nanoparticles produced by sol-gel method

In this study, TiB2 particles were synthesized by sol-gel method in nanometer size. First, the sol was prepared in a four-component system of alkoxide -boron carbide -water-alcohol based on the sol-gel chemical process under acidic conditions at pH = 5. Titanium tetra-isopropoxide and boron carbide were used as raw materials. After hydrolysis and gel formation followed by heat treatment, TiB2 n...

متن کامل

Oxynitride Glasses Prepared from Gels and Melts

The structures of glasses prepared by melting mixtures of alkali borosilicate glass and silicon nitride powders and by ammonolysis of porous borosilicate gels were studied using Fourier transform infrared spectroscopy and combustion analysis. Whereas there was little evidence of nitride bond formation in the melt prepared glasses, Si-N and B-N bonding were observed in the gel-derlved glasses. I...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
مهندسی متالورژی و مواد

جلد ۲۸، شماره ۱، صفحات ۱۰۹-۰

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023