laboratory investigation of performance of l-shaped collar on reduction of local scour around bridge abutment

نویسندگان

حسین خزیمه نژاد

مهدی قمشی

یوسف رمضانی

چکیده

scour around bridge piers is one of the most important fields of hydraulic research. local scour around bridge piers and abutment is one of the main reasons of bridge failures. in the field of scour at the bridges, researches are more focus on scour of piers in compare with abutment. while the available information on the bridge failures required cost, the major problems are related to abutment. therefore, most costs have spent in this part. one of the methods used to reduce of scour around bridge piers and abutment is installing collar. the collars protect the river bed against vortex flow in the vicinity of the piers and abutments . in this research the effect of two types of collar, include complete and l-shaped collar, were investigated on abutment scour reduction and application diagram is proposed. results show that increasing dimensions of collars will increasing the efficiency of performance. comparing of both collars indicated, that if the length of collars is larger than half the length of the abutment, the l-shaped collar is more effective in compare with complete collar. the l-shaped collar doesn’t prevent sediment movement due to lift vortex in downstream of abutment and for this reason it is shown more effective performance than the complete collar. also, using the l-shaped collars with less area is more cost effective.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of collar on time development and extent of scour hole around cylindrical bridge piers

An experimental approach was carried out to study the time development and extension of scouring around a circular pier protected by a collar. The experiments included the study of scouring around an unprotected pier as well as the pier protected with collars located at different levels. Width of collars was 3 times the pier diameter. It was found that with collars, though the scour depth and t...

متن کامل

combined effect of bed sill and collar in reduction of scour depth around cylindrical bridge piers

in this paper the effectiveness combination of bed sill and collar in reduction of local scour depth at cylindrical piers under clear water flow condition was investigated (v/vc=0.9). in the first of experiments, the bed sill was located in downstream and different distances from the piers. results indicated that minimum distance of the bed sill from the piers in downstream has maximum reductio...

متن کامل

experimental study of effect of collar on local scour reduction around vertical and 45˚ wing wall abutments

local scour around the abutment is of utmost importance in bridge failures. numerous methods such as riprap have been proposed to reduce the destructive effects of scouring; one of the ways to harness and reduce the local scour depth is installed protective collars around the abutment. in this paper effect of collar elevation (upper level, bed level and lower level), collar geometry and its siz...

متن کامل

Experimental Investigation of Scour Hole Geometry around Circular Bridge Piers

Failure of the bridges due to local scour around their piers can cause serious life losses and property damages and create significant environmental problems. In this experimental study, scour hole geometry around circular bridge piers were investigated. The experiments were carried out in a rectangular flume 80 cm wide, 18.6 m long and 75 cm high by using uniform sediment with a median diamete...

متن کامل

investigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem

در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
مهندسی عمران فردوسی

جلد ۲۷، شماره ۲، صفحات ۴۳-۰

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023