cfrp eeffects on reinforced concrete deep beams
نویسندگان
چکیده
deep beams are type of beams which their behavior is different from conventional beams because of their particular type of geometry. in this paper, the retrofitting of these beams is considered and 10 deep beams are tested experimentally and discussed about retrofitting methods. experimental studies indicate that the use of cfrp bands in the direction perpendicular to diagonal cracks in comparison with the use of cfrp in vertical direction are appropriate in condition that many cfrp with less width be used instead of using wide cfrp with lower number. the comparison of the experimental results is conducted with the results of existing relations in literature. the comparison shows that the existing relations cannot correctly predict the behavior and ultimate load of deep beams retrofitted by frp tested in this paper.
منابع مشابه
Strut Deformation in CFRP-Strengthened Reinforced Concrete Deep Beams
Strut-and-tie model (STM) method evolved as one of the most useful designs for shear critical structures and discontinuity regions (D-regions). It provides widespread applications in the design of deep beams as recommended by many codes. The estimation of bottle-shaped strut dimensions, as a main constituent of STM, is essential in design calculations. The application of carbon fibre reinforced...
متن کاملShear strengthening of reinforced concrete beams with CFRP
The current paper reviews existing design guidelines for strengthening beams in shear with carbon fibre reinforced polymer (CFRP) sheets and proposes a modification to Concrete Society Technical Report TR55. It goes on to present the results of an experimental programme which evaluated the contribution of CFRP sheets towards the shear strength of continuous reinforced concrete (RC) beams. A tot...
متن کاملExperimental Investigations on U- and L-Shaped End Anchored CFRP Laminate Strengthened Reinforced Concrete Beams - Springer
Strengthening of reinforced concrete beams using externally bonded CFRP laminate is the most popular choice. However, premature end peeling of CFRP laminate has been shown to be the main weakness of this method. Development of high shear and normal stresses at the end of strengthening laminate is the key reason to cause end peeling which is not preventable by conventional anchoring system. This...
متن کاملFlexural Testing of High Strength Reinforced Concrete Beams Strengthened with CFRP Sheets
The objective of this study is to investigate the effectiveness of externally bonded CFRP sheets to increase the flexural strength of reinforced high strength concrete (HSC) beams. Four-point bending flexural tests to complete failure on six concrete beams, strengthened with different layouts of CFRP sheets were conducted. Three-dimensional nonlinear finite element (FE) models were adopted by A...
متن کاملDebonding Failure of CFRP Reinforced Concrete Beams and In - Situ Monitoring Schemes
Fiber Reinforced Polymer (FRP) systems have gained much popularity as a method for reinforcing existing concrete structures. However a variety of sudden failure methods, such as debonding, delamination, and creep rupture have led to the development of code limitations on the strength that an FRP system can be considered to provide. The uncertainty brought on by the failure methods mentioned abo...
متن کاملReliabilty-based Torsional Design of Reinforced Concrete Beams Strengthened with CFRP Laminate
The structural reliability of torsional concrete beams strengthened with full and strip wrapping of carbon fiber reinforced polymer (CFRP) laminate is investigated. The first order-second moment reliability method has been applied to make a reliability assessment on the torsional capacity design by technical guideline in Iran. The code No.345 published by the Management and Planning Organizati...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
مهندسی عمران فردوسیجلد ۲۷، شماره ۲، صفحات ۱-۰
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023