comparative investigation of mass transfer process based on finite difference numerical method and experimental results for drying of papaya fruit

نویسندگان

sh. khodabakhsh aghdam

m. moradi

a. yousefi

چکیده

in this research, papaya slices with dimensions of 0.5×2×5 cm3 were dried at 45 °c using a cabinet dryer in which drying air velocity and relative humidity were 0.9 m/s and 30%, respectively. the moisture diffusion coefficient of papaya was determined in this drying condition. mass transfer equation with its boundary conditions was solved based on finite difference method. finally, coefficient of determination and goodness of fitting between the gained theoretical model by solving mass transfer equation, and experimental data were obtained r2=0.996 and rmse=0.00115. therefore, finite difference numerical method showed a suitable correlation with low error into the experimental data for solving of mass transfer equation.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

application of upfc based on svpwm for power quality improvement

در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...

15 صفحه اول

A Super - Element Based on Finite Element Method for Latticed Columns Computational Aspect and Numerical Results

This paper presents a new super-element with twelve degrees of freedom for latticed columns. This elements is developed such that it behaves, with an acceptable approximation, in the same manner as a reference model does. The reference model is constructed by using many Solid elements. The cross section area, moments of inertia, shear coefficient and torsoinal rigidity of the developed new elem...

متن کامل

A Super - Element Based on Finite Element Method for Latticed Columns Computational Aspect and Numerical Results

This paper presents a new super-element with twelve degrees of freedom for latticed columns. This elements is developed such that it behaves, with an acceptable approximation, in the same manner as a reference model does. The reference model is constructed by using many Solid elements. The cross section area, moments of inertia, shear coefficient and torsoinal rigidity of the developed new elem...

متن کامل

Heat and Mass Transfer in Leather Drying Process

Leather manufacturing involves a crucial energy-intensive drying stage in the finishing process to remove its residual moisture. Determining drying characteristics of leather is vitally important so as to optimize the drying stage. This paper describes an analytical way for determination of the drying characteristics of leather. The model presented, is based on fundamental heat and mass tra...

متن کامل

pistachio nut (ohadi variety) mass transfer simulation during process of drying using finite element method

drying is an important operational step in pistachio processing. there is a decrease in moisture content of pistachio nuts from 56-57% (d.b.) to 5-6% during the drying process. drying conditions affect the quality of dried pistachio nuts, therefore, this calls for an accurate description of the drying trend in the process. in this study finite element formulation and solution of diffusive moist...

متن کامل

fabrication of new ion sensitive field effect transistors (isfet) based on modification of junction-fet for analysis of hydronium, potassium and hydrazinium ions

a novel and ultra low cost isfet electrode and measurement system was designed for isfet application and detection of hydronium, hydrazinium and potassium ions. also, a measuring setup containing appropriate circuits, suitable analyzer (advantech board), de noise reduction elements, cooling system and pc was used for controlling the isfet electrode and various characteristic measurements. the t...

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
پژوهش های علوم و صنایع غذایی ایران

جلد ۸، شماره ۳، صفحات ۰-۰

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023