helicopter blade stability analysis using aeroelastic frequency response functions

نویسندگان

mostafa mohagheghi

ali salehzadeh nobari

alireza seyed roknizadeh

چکیده

in the present paper, the aeroelastic stability of helicopter rotor blade is determined using aeroelastic frequency response function. the aeroelastic model of blade is obtained by combining dowell - hodges beam model with loewy unsteady aerodynamic theory which considers an unsteady wake beneath the rotor. equations are formed and aeroelastic frequency response functions are obtained by inverting dynamic stiffness matrix of the aeroelastic system. exciting each degree of freedom, system response could be obtained. the resulted response is then plotted for various blade pitch angles and the behaviour of this function investigated to find out the stability criteria and also system natural frequencies. the results of this method are compared with stability boundaries obtained from the conventional p-k method.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Helicopter Blade Stability Analysis Using Aeroelastic Frequency Response Functions

In the present paper, the aeroelastic stability of helicopter rotor blade is determined using Aeroelastic Frequency Response Function. The conventional methods of aeroelastic stability usually use an iterative procedure while the present method does not require such approach. Aeroelastic Frequency Response Functions are obtained by inverting dynamic stiffness matrix of the aeroelastic system. S...

متن کامل

Analysis of Stresses in Helicopter Composite blade in Hovering Maneuver

The main purpose of this article is the structural analysis of a composite blade of a selected helicopter. In this study, the stresses on rotors' blades caused by centrifugal forces, lift, drag and torque are analyzed. The governing equations of the structure behavior and solving processes were carried out by MATLAB software, and simulation is carried out by ABAQUS software, and they are compar...

متن کامل

Optimum Design Ofa Helicopter Rotor for Low Vibration Using Aeroelastic Analysis and Response Surface Methods

An aeroelastic analysis based on finite elements in space and time is used to model the helicopter rotor in forward flight. The rotor blade is represented as an elastic cantilever beam undergoing flap and lag bending, elastic torsion and axial deformations. The objective of the improved design is to reduce vibratory loads at the rotor hub that are the main source of helicopter vibration. Constr...

متن کامل

rodbar dam slope stability analysis using neural networks

در این تحقیق شبکه عصبی مصنوعی برای پیش بینی مقادیر ضریب اطمینان و فاکتور ایمنی بحرانی سدهای خاکی ناهمگن ضمن در نظر گرفتن تاثیر نیروی اینرسی زلزله ارائه شده است. ورودی های مدل شامل ارتفاع سد و زاویه شیب بالا دست، ضریب زلزله، ارتفاع آب، پارامترهای مقاومتی هسته و پوسته و خروجی های آن شامل ضریب اطمینان می شود. مهمترین پارامتر مورد نظر در تحلیل پایداری شیب، بدست آوردن فاکتور ایمنی است. در این تحقیق ...

Electrochemically-actuated Morphing Helicopter Blade

The use of the expansion of lithium-ion cells for mechanical actuation has been recently reported by Chin et. al. (1). Under a stress of 10 MPa, actuating strains of up to 1.5% were achieved. Taking into account the cells approximate elastic modulus, this strain corresponds to a mechanical energy density ten times higher than that of current piezoelectric materials, although with slower actuati...

متن کامل

Frequency- and Time-domain Aeroelastic Analysis of Cable- Supported Bridges using Approximated Aerodynamic Transfer Functions

ABSTRACT: An approximate approach for the frequencyand time-domain aeroelastic analysis of bridge decks is presented. The aerodynamic transfer functions are approximated as a linear function with the coefficients determined through minimization of the weighted error between the exact and approximated transfer function. The weighting function in optimization is introduced for the improved approx...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of applied and computational mechanics

ناشر: shahid chamran university of ahvaz

ISSN 2383-4536

دوره 1

شماره 3 2015

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023