production of dispersed ceramic nano-particles in al alloy using friction stir processing

نویسندگان

amin rabiezadeh

young researchers and elite club, shiraz branch, islamic azad university, shiraz, iran ahmad afsari

departments of mechanical engineering, shiraz branch, islamic azad university, shiraz, iran

چکیده

in this research, surface composite layers containing nano sized tib2, al2o3-tib2, zro2 and cnt particles have been fabricated on aluminum alloy substrates by friction stir processing. the effects of different processing variables such as number of passes and strengthening particle distribution, hardness, and wear properties of surface nanocomposite layers have been evaluated by electron microscopy, hardness, and wear test. results showed that surface properties of aluminum alloy will be enhanced and the optimum conditions of properties which can be determined by comparing the effects of different parameters will be obtained. an increasein the number of passes up to four modifies microstructure and accordingly mechanical and wear properties were enhanced.surface composite produced by fsp significantly improved the dry sliding wear resistance of the al 6061 alloy by changing the wear mechanism. the fsped sample with al2o3-tib2 particles had higher wear resistance in comparison with those with tib2, zro2 and cnt. this enhancement is a consequent of better bonding between particles and aluminum matrix and higher microhardness.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Production of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing

In this research, surface composite layers containing nano sized TiB2, Al2O3-TiB2, ZrO2 and CNT particles have been fabricated on Aluminum alloy substrates by friction stir processing. The effects of different processing variables such as number of passes and strengthening particle distribution, hardness, and wear properties of surface nano...

متن کامل

Production of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing

In this research, surface composite layers containing nano sized TiB2, Al2O3-TiB2, ZrO2 and CNT particles have been fabricated on Aluminum alloy substrates by friction stir processing. The effects of different processing variables such as number of passes and strengthening particle distribution, hardness, and wear properties of surface nano...

متن کامل

synthesis of amido alkylnaphthols using nano-magnetic particles and surfactants

we used dbsa and nano-magnetic for the synthesis of amido alkylnaphtols.

15 صفحه اول

Optimized process parameters for fabricating metal particles reinforced 5083 Al composite by friction stir processing

Metal matrix composites (MMCs) exhibit improved strength but suffer from low ductility. Metal particles reinforcement can be an alternative to retain the ductility in MMCs (Bauri and Yadav, 2010; Thakur and Gupta, 2007) [1,2]. However, processing such composites by conventional routes is difficult. The data presented here relates to friction stir processing (FSP) that was used to process metal ...

متن کامل

Analysis and Comparison of Friction Stir Welding and Laser Assisted Friction Stir Welding of Aluminum Alloy

Friction Stir Welding (FSW) is a solid-state joining process; i.e., no melting occurs. The welding process is promoted by the rotation and translation of an axis-symmetric non-consumable tool along the weld centerline. Thus, the FSW process is performed at much lower temperatures than conventional fusion welding, nevertheless it has some disadvantages. Laser Assisted Friction Stir Welding (LAFS...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of modern processes in manufacturing and production

جلد ۵، شماره ۳، صفحات ۴۱-۵۷

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023