an in-vitro study on the release of fluoride from two restorative materials and their rechargeability after exposure to daily 1000 ppm fluoride

نویسندگان

a. kowsari

jh. mahmoodian

t. ghavami

چکیده

statement of problem: since the fluoride releases from materials with the property of releasing fluoride are decreasing gradually, it seems that probably the material rechargeability is more important than their long-term fluoride release. purpose: the objective of this study was to asses the fluoride release and rechargeability of 2 types of fluoride releasing restorative materials, a resin modified glass ionomer (vitremer) and a compomer (compoglass f), after exposure to daily naf solutions containing 1000 ppm f, for 1 minute. materials and methods: twelve discs ( 8 mm ×2 mm) of each of the materials were fabricated, and divided into 2 groups (test and control). all discs were stored in 4 ml artificial saliva at 37c. in group 1 (n=6), the specimens were immersed in artificial saliva which was changed daily for 25 days. in group 2 (n=6), in addition to receiving the same treatment as group 1, the specimens were immersed in naf solution (1000ppm f, ph=6.9) for 1 minute before daily saliva change. a potentiometer was used to determine the amount of fluoride released on days 1, 2, 3, 5, 10, 15, 20 and 25, after the daily saliva change, in all study groups. data were analyzed by the t-student test after confirmation of the equality of variances by leven’s test. results: both materials continued releasing fluoride throughout the whole study period. for each material, the release was highest on day one. during the first 3 days, glass ionomer released significantly higher amounts of fluoride as compared to compomer (p 0.05). after exposure to naf solution, none of the materials showed statistically significant rechargeability (p>0.05) and the amount of fluoride-release continued to drop during the study period in similar patterns for both the test and the control groups. conclusion: it may be concluded that rechargeability of glass ionomer and compomer, using daily neutral fluoride mouth rinses and toothpastes does not occur in reliable amounts.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Comparison of Solubility and Release of Fluoride from Easthetic Restorative Materials in Water and Acid: An In Vitro Study

Background & Aims: Secondary caries is one of the most common problems in restorative dentistry. The release of flouride ions could substantially benefit the tooth enamel and neigboring dentin because flourid can combat caries. The purpose of this in vitro study was to evaluate the solubility rate and release of fluoride from tooth-colored restorative materials (Iono CID, Fuji II LC, FugiIX, Fu...

متن کامل

Fluoride release from restorative materials.

The aim of this study was to evaluate in vitro fluoride (F) release from 4 restorative materials (3M ESPE): Ketak Molar Easymix [KME - conventional glass ionomer cement (GIC)]; Rely-X luting 2 [RL2 - resin-modified GIC (RMGIC)]; Vitremer (VIT- RMGIC); and Filtek Z250 [Z250 - negative control]. Disc-shaped specimens were fabricated according to the manufacturer's instructions and placed into 10 ...

متن کامل

An estimation of fluoride release from various dental restorative materials at different pH: In vitro study.

BACKGROUND In the mid of 1980s, the cariostatic effect of fluoride ions on enamel caries had been demonstrated in many studies. The use of fluoride releasing dental restorative materials has seen increasing from many years for the specific purpose of leaching of fluoride into the surrounding tissues to inhibit secondary dental caries as well as prevention of caries in the newly erupted tooth. I...

متن کامل

Fluoride release from restorative materials coated with an adhesive.

The retention of both fluoride resins and resin-modified glass ionomer cements to dental tissues can be improved by the association of an adhesive system which promotes the bonding between the resin component and dentin, forming a hybrid layer. The purpose of this investigation was to evaluate if the presence of the adhesive, being part of the hybrid layer composition, interfered with the fluor...

متن کامل

Fluoride release by restorative materials before and after a topical application of fluoride gel.

The release of fluoride from restorative materials (Vitremer, Ketac-Fil, Fuji II LC and Freedom) was evaluated during two 15-day periods, before and after a topical application of acidulated phosphate fluoride gel (APF). For each material, 6 specimens were made, which were immersed in 2 ml of deionized water. The fluoride concentration dosages in the solutions were read at intervals of 24 hours...

متن کامل

Fluoride and aluminum release from restorative materials using ion chromatography

OBJECTIVE The aim of this study was to determine the amounts of fluoride and aluminum released from different restorative materials stored in artificial saliva and double-distilled water. MATERIAL AND METHODS Cylindrical specimens (10 x 1 mm) were prepared from 4 different restorative materials (Kavitan Plus, Vitremer, Dyract Extra, and Surefil). For each material, 20 specimens were prepared,...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of dentistry, tehran university of medical sciences

جلد ۲، شماره ۳، صفحات ۷۹-۸۵

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023