influence of implant position on stress distribution in implant-assisted distal extension removable partial dentures: a 3d finite element analysis.
نویسندگان
چکیده
distal extension removable partial denture is a prosthesis with lack of distal dental support with a 13-fold difference in resiliency between the mucosa and the periodontal ligament, resulting in leverage during compression forces. it may be potentially destructive to the abutments and the surrounding tissues. the aim of this study was to assess the effect of implant location on stress distribution, in distal extension implant assisted removable partial dentures.three-dimensional models of a bilateral distal extension partially edentulous mandible containing anterior teeth and first premolar in both sides of the arch, a partial removable denture and an implant (4×10mm) were designed. with the aid of the finite element program ansys 8.0, the models were meshed and strictly vertical forces of 10 n were applied to each cusp tip. displacement and von mises maps were plotted for visualization of results.when an implant was placed in the second premolar region, the highest stress on implant, abutment tooth and cancellous bone was shown. the lowest stress was shown on implant and bone in the 1(st) molar area.implants located in the first molar area showed the least distribution of stresses in the analyzed models.
منابع مشابه
Influence of Implant Position on Stress Distribution in Implant-Assisted Distal Extension Removable Partial Dentures: A 3D Finite Element Analysis
OBJECTIVE Distal extension removable partial denture is a prosthesis with lack of distal dental support with a 13-fold difference in resiliency between the mucosa and the periodontal ligament, resulting in leverage during compression forces. It may be potentially destructive to the abutments and the surrounding tissues. The aim of this study was to assess the effect of implant location on stres...
متن کاملPeriodontal ligament influence on the stress distribution in a removable partial denture supported by implant: a finite element analysis
OBJECTIVES The non-homogenous aspect of periodontal ligament (PDL) has been examined using finite element analysis (FEA) to better simulate PDL behavior. The aim of this study was to assess, by 2-D FEA, the influence of non-homogenous PDL on the stress distribution when the free-end saddle removable partial denture (RPD) is partially supported by an osseointegrated implant. MATERIAL AND METHO...
متن کاملEfficacy of adding a supporting implant in stress distribution of long-span fixed partial dentures: a 3D finite element analysis
Background. Long span is seen in many clinical situations. Treatmentplanning options of these cases are difficult and may require FPD, RPD or ISP. Each option has its own disadvantages, including mechanical problems, patient comfort and cost. This article will evaluate the stress distribution of a different treatment option, which consists of adding a single sup-porting implant to the FPD by us...
متن کاملReview of Implant Support for the Distal Extension Removable Partial Dentures
Partially edentulous patients with missing premolars and molars have been conventionally rehabilitated using the free-end removable partial dentures (RPDs). With the advancements in implant dentistry, the benefits of implant-retained/supported mandibular implant overdentures relative to conventional mandibular dentures with bilateral extensions (Class I Kennedy) have now been extensively invest...
متن کاملthe effectiveness of adding a supporting implant in stress distribution of long span fixed partial denture (3d finite element analysis)
background and aim of study: long span is seen in many clinical situations, treatment planning options of these cases are difficult and may require: fpd, rpd or isp. each option has its own disadvantages: mechanical, patient relief and cost respectively. this article will evaluate the stress distribution of another treatment option which is adding a single supporting implant to the fpd by using...
متن کاملStress Distribution in Natural Tooth and Implant Supported Removable Partial Denture with Different Attachment Types: A Photoelastic Analysis
Background and Aim: Different attachment designs have been developed to connect implant to natural teeth in partial dentures; however, adequate studies have not been performed to determine stress distribution patterns in these designs. The present study aimed to assess stress distribution patterns in natural tooth and implant supported removable partial denture with different attachment designs...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
journal of dentistry, tehran university of medical sciencesجلد ۱۱، شماره ۵، صفحات ۵۲۳-۳۰
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023