effect of accelerated aging on color change of direct and indirect fiber-reinforced composite restorations

نویسندگان

masomeh hasani tabatabaei associate professor, department of operative dentistry, dental research center, faculty of dentistry, tehran university of medical sciences, kargar ave, tehran

farnaz farahat assistant professor, department of operative dentistry, shahid sadoughi university of medical sciences, yazd, iran

zahra hassani dentist

elham ahmadi assistant professor, department of operative dentistry, dental research center, faculty of dentistry, tehran university of medical sciences, kargar ave, tehran

چکیده

objectives : the aim of this study was to assess the effect of artificial accelerated aging (aaa) on color change of direct and indirect fiber-reinforced composite (frc) restorations. materials and methods: direct (z250) and indirect (gradia) composite resins were reinforced with glass (gf) and polyethylene fibers (pf) based on the manufacturers’ instructions. forty samples were fabricated and divided into eight groups (n=5). four groups served as experimental groups and the remaining four served as controls. color change (∆e) and color parameters (∆l*, ∆a*, ∆b*) were read at baseline and after aaa based on the cielab system. three-way anova and tukey’s test were used for statistical analysis. results: significant differences were found in δe, δl*, δa* and δb* among the groups after aaa (p<0.05). most of the studied samples demonstrated an increase in lightness and a red-yellow shift after aaa. conclusions: the obtained ∆e values were unacceptable after aaa (∆e≥ 3.3). all indirect samples showed a green-blue shift with a reduction in lightness except for gradia/pf+ nulitef. keywords: aging; composite resins; color

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Accelerated Aging on Color Change of Direct and Indirect Fiber-Reinforced Composite Restorations

OBJECTIVES The aim of this study was to assess the effect of artificial accelerated aging (AAA) on color change of direct and indirect fiber-reinforced composite (FRC) restorations. MATERIALS AND METHODS Direct (Z250) and indirect (Gradia) composite resins were reinforced with glass (GF) and polyethylene fibers (PF) based on the manufacturers' instructions. Forty samples were fabricated and d...

متن کامل

Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites

One of the greatest impediments to use polymer-matrix composites is their susceptibility to degradation when exposed to the elevated temperatures and the limited knowledge on the thermal and mechanical properties of these composites at such temperatures. The objective of this study is to evaluate the effects of accelerated heat aging on the tensile properties of the Woven Basalt/Phenolic (WBP) ...

متن کامل

in vitro evaluation of veneering composites and fibers on the color of fiber-reinforced composite restorations.

color match between fiber-reinforced composite (frc) restorations and teeth is an imperative factor in esthetic dentistry. the purpose of this study is to evaluate the influence of veneering composites and fibers on the color change of frc restorations.glass and polyethylene fibers were used to reinforce a direct microhybrid composite (z250, 3m espe) and a microfilled composite (gradia indirect...

متن کامل

In Vitro Evaluation of Veneering Composites and Fibers on the Color of Fiber-Reinforced Composite Restorations

OBJECTIVE Color match between fiber-reinforced composite (FRC) restorations and teeth is an imperative factor in esthetic dentistry. The purpose of this study is to evaluate the influence of veneering composites and fibers on the color change of FRC restorations. MATERIALS AND METHODS Glass and polyethylene fibers were used to reinforce a direct microhybrid composite (Z250, 3M ESPE) and a mic...

متن کامل

Bond strength between luting materials and a fiber-reinforced resin composite for indirect restorations.

The purpose of the present study was to evaluate the bond strength between a fiber-reinforced composite (FRC) and six luting agents (Panavia F 2.0, Linkmax MC, Chemiace II, Multibond, Super-Bond C&B, and Fuji I). A prosthodontic resin composite material (RC-control) and a luting agent containing no functional monomer (MT) were used as controls. Shear bond strengths between alumina-blasted FRC a...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of dentistry, tehran university of medical sciences

جلد ۱۳، شماره ۳، صفحات ۱۶۸-۱۷۵

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023